- EOL
|
Attention! The sale of the product has been completed. Check thenew version. |
Description
The controller equipped with eight relays with parameters 277 V / 10 A allows you to control devices supplied with mains voltage usingthe applicationprovided by the manufacturer.The device communicates with a computer via USB port(cable tobe purchased separately). A 7.5 V power supply unit is also included.
On the top panel there areLED lights,which indicate activation of individual relays.
|
Attention! The Ethernet socket is optional, not supported in this product version. |
Specification
- Power supply voltage of the device: 7.5 V (mains adapter included)
- Relay switching voltage: up to 277 V AC
- Relay switching current: up to 10 A
- Number of relays: 8
- Controller: STM32 series
- Communication: USB B socket(cableto be purchased separately)
- Operating temperature: -30 °C to +85 °C
- Dimensions: 145 x 90 x 40 mm
- Weight: 490 g
The devices are connected by means of screw connectors, which enable to connect the wires with a screwdriver.
Resetting to factory settings
To reset the unit to factory settings, hold down the Default button on the top panel for 2 seconds.Use a thin tool such as a needle.
Software
The manufacturer provides an application that allows you to control each relay separately via the USB bus.
The relays are controlled by means of buttons in the main application panel.
In order to start the device, the following steps must be taken:
-
Connect the power supply.
-
Connect the controller to the computer viathe USB cable (notsupplied separately).
- Download and installthe USB drivers.
- Download and runthe PC application(fileEnternet_Com_Relay.exe).
- Go to the tabSerial port control relay.
- Select the appropriate communication port and set the transmission speed to 9600 bps, for example.
- From now on, you can control the relays with the buttons.
Included:
- Relay module
- 7.5 V power supply
Useful links |
