- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
OLED color display with a diagonal of 0.96" and a resolution of 160 x 80 px. Screen-based driver ST7735, works with voltages of 3.3 V and 5 V, communication via SPI. It also has a slot for memory cards microSD, and also straight goldpin connectors for self-assembly. It works, in particular, with the Arduinoboards.
The product is compatible with Arduino Auser's guidefor Arduino users. |
Connection
The module has straight goldpin connectors for self-soldering - raster 2.54 mm, communicates via the SPI interface. Description of the specific outputs is given in the table.
Pin | Symbol | Description |
---|---|---|
1 | Vin | Supply voltage from 3.3 V to 5.0 V. |
2 | 3V | The output of 3.3 V using the internal regulator. |
3 | GND | The ground of the system. |
4 | SCK | Clock line of SPI bus. |
5 | MISO | Pin MISO is used for memory cards microSD. |
6 | MOSI |
Pin MOSI used for communication with the microSD card or a TFT display. |
7 | TFTCS | Pin Chip Select of the display. |
8 | RST | Reset Pin activated by low state. |
9 | DC | Pin selection data / command to TFT display. |
10 | SDCS | Pin Chip Select from the memory cards microSD. |
11 | LIT | Input PWM backlight control display. |
Display has simple goldpin connectors for self-soldering.
Specification
- Working voltage: from 3.3 V to 5.0 V
- Driver:ST7735R(documentation)
- Communications: SPI
- Display type: OLED color
- Diagonal: 0.96"
- Resolution: 160 x 80 px
- Built-in slot for memory cards microSD
- Attached goldpin connectors - 2.54 mm raster
- Dimensions: 32 x 28 x 6 mm
Useful links |