• EOL

E-paper E-Ink 6'' 1448x1072px - display for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 17590

Index: WSR-16400 EAN: 5904422325930

Set of e-paper display and overlay for Raspberry Pi mini computer. The 6" screen with a resolution of 1448 x 1072 px, can display two colors: black and white, supports partial refreshing. It works with a voltage of 5 V.

E-paper E-Ink 6'' 1448x1072px - display for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 17590
€133.50
€108.54 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Waveshare
Compatibility: Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Description: E-paper E-Ink 6'' screen 1448x1072px - display for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 17590.

Set of e-paper displayandoverlay for RaspberryPimini computer. The 6" screen with a resolution of 1448 x 1072 px,candisplay two colors: black and white, supports partial refreshing. The screen is equipped withIT8951controller.It communicatesthrough SPI / USB interface. This type of displays can be used to read e-books and electronic magazines. It works with a voltage of5 V.

Ekran e-paper 6

Waveshare E-paper E-Ink 7.8" 1872 x 1404 px.

The item on sale is a screen with an overlay, RaspberryPimini computer can be purchased separately.

E-paper displays are characterized byvery low power consumption and wide viewing angles.The screen is an ideal choice for applications such as ebook reader, E-Ink and industrial devices.

RaspberryPicompatible product

The manufacturer provides auser guide forRaspberry Pi, Windows PC and STM32.

Overlay outputs

Below is the output table for SPI communication.

Pin Description
5 V Supply voltage: 5 V
GND The weight of the system.
MISO SPI interface Pin MISO.
MOSI Pin MOSI SPI interface.
SCK SPI interface clock line.
CS Chip select activated in a low state.
RST External reset activated by low state.
HRDY Busy status output, activated by low status.

E-paper display specification

  • Power supply voltage: 5 V
  • Diagonal: 6"
  • Resolution: 1448 x 1072 px
  • Display dimensions: 122.4 x 90.6 mm
  • Pixel size: 0.0845 x 0.0845 mm
  • Displayed colours: black, white
  • Grey level: 2 to 16 (1 to 4 bits)
  • Full refresh time: up to 1 s
  • Viewing angle: over 170°
  • Power consumption during refreshment: 0.88 W
  • Power consumption in idle mode: 0.3 W
  • Interface: SPI /USB / I80
  • External dimensions: 138.4 x 101.8 x 1.01 mm
  • Overlay dimensions: 65.15 x 56.21 mm

Screen - type e-paper
Screen - diagonal 6.00 ''
Screen - interface GPIO
Screen - touch no
Screen - resolution 1448x1072px
Package width 28.8 cm
Package height 18.2 cm
Package depth 5 cm
Package weight 0.253 kg

Mateusz

06/06/22

Question: Good day, Will I be able to connect this display to a raspberry pi 400 via a female-to-male idp cable? regards MB
Answer: We do not stock the corresponding female-to-male ribbons (only female-to-female versions are available from us)
You can use one of the dedicated leads to connect accessories to Pi 400:
https://botland.com.pl/raspberry-pi-400/18899-flat-hat-hacker-wyprowadzenie-pinow-raspberry-pi-400-pimoroni-pim536-769894016862.html
https://botland.com.pl/raspberry-pi-400/20382-adapter-gpio-do-raspberry-pi-400-sb-components-sku21239-5055652921239.html

Customers who bought this product also bought:

Products from the same category: