- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Minicomputer Khadas VIM2 Pro with an efficient processorAmlogic S912 octa-core 64-bitARM Cortex AM53 1.5 GHzand with the graphic system ARM Mali-T820MP3 750 MHz. It has3 GB ofDDR4 RAM,32 GB ofeMMC memory, integratedwi-fiandBluetooth 5.0 , and2x USB 2.0 OTG,type A and oneUSB connector,type-C,40 GPIO, microSD card connector,Ethernet port,HDMI, IR receiver and three buttons. The kit also includes a USB cable, type C.
Operating systems
Minicomputer Khadas VIM2 works with the systemsAndroid, AndroidTV, LibreELEC, Ubuntu, DualOSandU-Boot. The system can be uploaded to themicroSD card or directly on the internal memory of the minicomputer.
|
Operating systems can be downloaded fromthe manufacturer's website. |
What it takes to run minicomputer Khadas?
- AC adapter with USB connector, type C- 5 V to 9 V (recommended 5V), with maximum load current of 2 A
- HDMI cable- to connect the device to the monitor
- Mouse and keyboard - to control and input data into the device
Communication
Minicomputer has basic communication interfaces that can be found in computers of PC class. The user has at his or her disposal:
- two connectors USB A+USB type-C, to which can be connected, for example, a mouse, keyboard or USB flash drive. If you find that the slots are too short, you can increase their number usingan external HUB USB.
- Ethernet Gigabit slot, that is, the ability to directly connect to the network.
- the wi-fi moduleallows for communication with wireless network802.11 b/g/n/ac.
- Bluetooth 5.0 -enables data transmission through the interface.
- GPIO x 40 pin -outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers, engines. Among them are the pins supporting interfaces: I2C, I2S, SPDIF, UART, PWM, ADC, ISO7816, IOs.
- a slot for microSD -slot formicroSD memory cards, on which can be installed the operating system.
- HDMI connector- it transfers the image to the monitor.
Power
As a power source, the system uses a USB connector, typeC. The manufacturer recommends that the voltage indicated on the plug had a value of 5.0 V and a current delivery of the used adapter shall not be less than 2.0 A. In our assortment you will findpower supplies that meet these parameters, for example:the Extreme 3.1Apower supply.
Specification |
|
| Model | VIM2 PRO |
| Specification |
|
| Processor | Amlogic S912 |
| The core |
Octa-Core ARM Cortex A53 |
| Graphic processor | ARM Mali-T820MP3 750 MHz |
| Systems |
Android, AndroidTV, LibreELEC, Ubuntu, DualOS, U-Boot |
| Clock frequency | 1.5 GHz |
| RAM |
3 GB DDR4 64-bit |
| Memory |
32GB eMMC microSD card |
| GPIO slot |
40-pin GPIO |
| Power |
5 V / 2 A - USB, type-C |
| Board sizes | 82 x 57.5 x 11.5 mm |
| Interfaces | |
| USB-Host |
2x USB 2.0, type A |
| Network interface | Gigabit Ethernet |
| The Wi-Fi Interface | module wi-fi802.11 b/g/n/ac with antenna |
| Bluetooth interface | Bluetooth 5.0 |
| Video | HDMI 2.0a, 4K 60fps |
| Audio |
HDMI |
| Communication |
UART, I2C, GPIO, I2S, PWM,SPDIF, ADC, ISO7816, IOs |
| Infrared |
2 channel of IR |
| Buttons |
1x Power 1x Functional 1x Reset |
| Other |
status LEDs |
| Included |
USB cable, type C |
Useful links |
