- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer resin FlashForge Standard LCD 0,5 kg - Grey
Standard photopolymer resin from FlashForge. It is used as a molding material for prints in open source 3D print ers equipped with LCD projector. The product is grey in colour and has a short exposure time. The resin is cured by light waves of 405 nm. It may emit an unpleasant odour during use. Finished models obtained from FlashForge Standard LCD are characterized by high detail and smooth surface. Package contains 0.5 kg of the product. FlashForge LCD Standard resin is suitable for low volume production and prototyping.
Resin for 3D printers FlashForge Standard LCD 0,5 kg - Grey.
3D printer resin - sample printout.
Photopolymer resin for 3D printers
Resin is a light-curing material designed for 3D printing. 3D printers using DLP and LCD technology can be successfully used to create even very detailed models. It is worth remembering that resin for 3D printing emits a slight odor, so all rooms where there are printers of this type, must be very well ventilated.
When working with the resin, always use protective equipment: glasses and nitrile gloves.
Shake the resin before use.
Specification of resin for 3D printers
| Parameter | Value |
|---|---|
| Manufacturer | FlashForge |
| Resin type | LCD photopolymer |
| Colour | Grey |
| Density | 1.05 to 1.15 g/ml |
| Viscosity | 250 to 350 cps (at 25°C) |
| Shore Hardness | 85 D |
| Tensile strength | 48 MPa |
| Tensile elasticity | 2250 MPa |
| Elongation at tension | 10% |
| Bending strength | 86 MPa |
| Packing capacity | 500 g |
Useful links |
