- EOL
|
Attention! The product has been discontinued. Check other products incategory. |
Description
Wi-fi module is based on the LPB100 system which works with802.11 b/g/n standard. Communication is via theUARTinterface(RX, TX pins), it operates with a voltage of 3.3 V. It has LEDs indicating the transfer and the status of the device, and abuilt-in USB to UART converterwith theminiUSB slot.
| Detailed information is available indocumentationandthe user manual. |
Specification
- Supply voltage: 5 V
- The module is based on aWiFi-LPB100
- UART interface support:
- RX - tolerates the voltage of 3.3 V
- TX - operates with a voltage of 3.3 V
- Reset, Reload and WPS button
- External antenna with the u.FL connector
- Pins pitch: 2.54 mm
- MiniUSB connector
- Included is the USB - miniUSB cable
- Module dimensions: 76 x 38 mm
Service
- Holding the RESET button for 3 seconds returns the device to factory settings
- The READY LED: it works if you run the wi-fi module
- The communication operates at the 3.3 V voltage standard so to connect the 5 V board, for example,Arduino Uno, you must usea voltage converter
Useful links |
