- EOL
Attention! The product has been discontinued. Check others products incategory. |
Description
Board is designed to build WiFi232 and WiFi-LPT100 systems. It also works as the USB-UART converter. It has a built-in miniUSB port, Ethernet, screw connectors, indicating LEDs and buttons. The module is powered with the voltage of 5 V.
The subject of the sale is the WiFi501 module. WiFi232 systemmust be purchased separately.
Detailed information is available inthe Quick Start guideand user manual for WiFi232. |
Specification
- Supply voltage: 5 V DC
- Designed for the WiFi-LPT100 and WiFi232 modules
- UART interface support:
- RX - tolerates voltage of 3.3 V
- TX - operates with a voltage of 3.3 V
- Reset and Reload button
- Built-in ON-OFF switch
- Pins pitch: 2.54 mm
- The miniUSB and Ethernet connector
- Screw connectors
- Module dimensions: 77 x 48 mm
Service
- Hold the RELOAD button for 3 seconds returns the device to factory settings
- The READY LED: it works if you run the wi-fi module
- Link LED: works with WiFi232 modules, illuminates when it detects a connection
- LED PWM: works with WiFi-LPT100 module, and the brightness changes when you turn on the PWM output
Useful links |