LED strips and strings are one of the most interesting solutions for energy-efficient lighting used today in households and apartments, public spaces, restaurants, shops and shopping centers. They can serve both practical as well as decorative functions, often combining them both, making them a common choice for modern interiors. LED strips can be of any length, we can easily adjust them to the specific area we want to illuminate. The diodes emit white light, but also colored light. We can equip the system with drivers and controllers, which will allow you to create lighting scenes and manage the light. A huge advantage of LED technology is its energy efficiency, which is one of those factors that have a key impact on the increasing choice of this solution. Moreover, the diodes emit very little heat, which makes them very well suited for close contact with heat-sensitive materials. LED strips and strings are available in different variants in Botland. Furthermore, we offer numerous accessories for light control and management.
- New
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Index: AKS-10816
- Reduced price
- Promotion
I2C / UART distance and gesture sensor - 30cm - SparkFun SEN-13162
Index: SPF-09329
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
SenseCAP M1 SD Card Replacement Kit - Seeedstudio 114992729
Index: SEE-22567
- Reduced price
- Promotion
LED strips
Loading...
mCookie LED matrix - RGB LED matrix - MicroDuino MCBS41
Universal module of 6 RGB diodes in mCookie standard. The product is compatible with the Itty Bitty Buggy robot, with which it is connected via a magnetic connector (without...
Index: MIC-15490
Index: MIC-15490
- On sale!
- Promotion
LED RGB WS2811 - IP65 60LED/m, 14,4W/m, 12V - 5m - black
Individually addressed RGB LEDs located in a 5 m strip with a density of 60 diodes per meter. Each pixel consists of three RGB LEDs and can emit a color from 24-bit palette. To...
Index: LED-07152
Index: LED-07152
Grove - LED Strip Driver v2.0 - LED driver for Arduino - Seeedstudio 105020002
A module that allows you to control the brightness of monochrome LED strip with LED RGB brightness and color. It has 2-pin connectors, power supply screw connector, 4-pin screw...
Index: SEE-04443
Index: SEE-04443
Splitter for LED strip - 6 inputs - 6-24V/3A
The splitter enables connection of several LED circuits. Voltage from 6 to 24V, current up to 3 A.
Index: LEC-11647
Index: LEC-11647
- On sale!
- Promotion
Matrix 64x32 - 2048 LED RGB individually addressed
The matrix is composed of 2048 individually addressed RGB LEDs arranged in 32 rows and 64 columns. Each pixel may emit a color from 24-bit palette. Fot the module's controly...
Index: DFR-08363
Index: DFR-08363
Set: LED strip SMD3528 IP20 4.8W, 60 LEDs / m, neutral color - 5m + 12V / 5A power supply
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The color of the light is neutral white. Protection...
Index: LED-09680
Index: LED-09680
- On sale!
- Promotion
Strip LED SMD5050 IP65 14,4W, 60 LED/m, 10mm, cold white - 5m
RGB LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. The color of the light is cold white....
Index: LED-07079
Index: LED-07079
Set: LED strip SMD3528 IP65 4,8W, 60 diode/m, cold white - 5m + 12V/3A power supply
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The color of the light is cold white. Protection factor...
Index: LED-09683
Index: LED-09683
- On sale!
- Promotion
Connector for LED strips 8mm 2 pin
Connector that allows you to connect two LED strips with a width of 8 mm. It has two pins. Works with LED strips in monochrome.
Index: LED-08129
Index: LED-08129
Grove - LED RGB module - 15 diodes WS2813 - Seeedstudio 104020172
Module with 15 WS2813 RGB LEDs arranged in one row. There is a Grove connector on the board for easy connection of the module to the base plate. Each LED is individually...
Index: SEE-15556
Index: SEE-15556
Strip LED SMD2835 IP20 9,6W, 120 LED/m, 8mm, cold white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 9.6 W/m, density of 120 diodes per meter. The color of the light is cold white. Protection...
Index: LED-07090
Index: LED-07090
- Reduced price
- Promotion
Elastic matrix 8x32 - 256 RGB LED RGB - WS2812B individually addressed
The matrix consists of 256 individually addressed RGB LEDs arranged in 8 rows and 32 columns. Each pixel can emit a colour from a 24-bit palette. One microcontroller pin is...
Index: LED-06185
Index: LED-06185
NeoPixel Jewel - ring LED RGB 7xWS2812 5050 - Adafruit 2226
The ring consists of 7 individually addressed RGB LEDs WS2812 5050 with integrated control unit and with holes. Module needs one microcontroller output. Outer circle diameter...
Index: ADA-02945
Index: ADA-02945
BleBox ReflectiveSwitch - reflective LED driver 12-24V / 4A
Mini reflective switch used with LED strips. Works with voltage from 12V to 24V and electric current up to 4A. It turns on the light inside the furniture (e.g. wardrobe) and...
Index: BOX-08901
Index: BOX-08901
- Reduced price
- Promotion
Set: LED strip SMD3528 IP20 4.8W, 60 diode/m, cold white - 5m + 12V / 3A power supply
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The color of the light is cold white. Protection factor...
Index: LED-09682
Index: LED-09682
- On sale!
- Promotion
BleBox wLightBoxS Pro - WiFi LED driver - Android / iOS application
A ready-made controller module that allows you to control the brightness of the LED lighting through a WiFi network using applications for mobile devices. It is powered by...
Index: BOX-17720
Index: BOX-17720
Power supply GPV-20-12 for LED strip - 12V / 2A / 24W - waterproof
Waterproof, stabilized AC adapter for powering LED tape. Supply voltage: 100 V to 240 V. Output voltage: 12 V DC. Output current: 2 A. Connector: free wires with stripped...
Index: ZAS-08683
Index: ZAS-08683
BleBox wLightBox Pro - LED RGBW WiFi driver - Android / iOS application
A small WiFi module with an additional long-range antenna, allows you to control a 12 V or 24 V RGBW LED strip with a maximum current consumption of 12 A , four...
Index: BOX-17721
Index: BOX-17721
LED Strip SMD2835 IP20 12W, 120 LED/m, 8mm, warm white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 12 W/m, density of 120 diodes per meter. The color of the light is warm white. Protection factor...
Index: LED-07088
Index: LED-07088
Strip LED SMD2835 IP20 4,8W, 60 diod/m, 8mm, warm white - 50m
High quality LED tape with a white, warm light colour. The light strip has a low power consumption of 4.8 W/m and is powered by 12 V. It has an IP20 protection degree . It is...
Index: ELD-15652
Index: ELD-15652
- On sale!
- Promotion
Strip LED SMD2835 IP20 12W, 120 LED/m, 8mm, natural white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 12 W/m, density of 120 diodes per meter. The color of the light is natural white. Protection...
Index: LED-07089
Index: LED-07089
Strip LED SMD2835 IP65 4,8W, 60 LED/m, 8mm, natural white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The color of the light is natural white. Protection...
Index: LED-07093
Index: LED-07093
LED strip driver - Mini - 11 keys
The module allows you to control the brightness of a single-color LED strip. It is equipped with a DC 5.5 / 2.1 mm power connector and a remote control.
Index: LED-08130
Index: LED-08130
Grove - LED RGB module - 20 diodes WS2813 - Seeedstudio 104020170
The module is equipped with 20 RGB WS2813 LEDs . On the board there is a Grove connector for simple connection to the base plate. Each of the LEDs is individually addressed ,...
Index: SEE-15554
Index: SEE-15554
See also
Standard LED strips – simple and effective
LED strips , also called - due to their flexibility and considerable length - LED strips , are a perfect solution wherever you need to obtain light with a specific color temperature or any shade from the RGB palette dispersed over a large surface.
LED strips – additional information
The unquestionable advantage of LED strips is the ease of installation - the underside is covered with a strong self-adhesive layer, so installation is as simple as cutting the strip to the required size (which is much easier because the strips have a modular structure that can be divided every few centimeters), connecting it to the power supply or LED driver and stick it in the right position.
And even connection is very simple here, because special terminal connectors have been created for LED strips, which you can also find in our offer. Our online store offers everything you need to install an LED strip.
Addressable LED strips – LED lighting
Standard LED strips have been eagerly used by interior decorators and advertising companies for many years. However, simple LED strips do not allow for the effect of movement or modification of the light color depending on the part of the strip.
Addressable LED strips are perfect for such particularly demanding applications. Their construction is based on special RGB LEDs with a built-in digital controller.
Thanks to this solution, only one GPIO line of the microcontroller is enough to handle even the entire long tape. Properly programmed effects can delight even the most demanding recipients, creating a unique atmosphere in the illuminated interior.
Drivers and accessories for LED strips
In this category you will also find a wide range of accessories necessary to connect, power and control the light generated by LED strips. In the case of simple, standard (single-color) LED strips, constant voltage power supplies will work perfectly, e.g. excellent modular power supplies from the renowned company Mean Well.
RGB LED strips require appropriate control of individual channels to work - for this purpose, you can use both simple controllers with an infrared remote control and intelligent cubes belonging to the BleBox home automation system. Here you will also find the necessary connectors for all types of LED strips.
The RGB LED strip allows you to change the light color, e.g. using a remote control. RGB (red, green, blue) diodes, thanks to the combination of three colors, can emit light of any color (from the RGB palette).
LED strips and chains - FAQ
The most frequently chosen option for LED interior decoration are standard LED strips, chains and tapes . Single-color LED strips do not require a controller, but to obtain interesting optical effects you will need an LED controller . They are characterized by low energy losses, high durability and luminance value, lighting efficiency and low power consumption.
LEDs technically cannot burn out because they do not have a jumper like traditional incandescent bulbs. "LED life limits" are a different matter - failures related to a fault in the electrical network, sparking, voltage surges or faulty fixtures.
Stick LED strips to aluminum profiles, metal elements, flat bars or other surfaces that can act as a radiator (heat dissipation) for the strip. Before gluing the surface, clean and degrease the surface.
Several LED strips can be connected together, with the maximum number of connections depending on the output power of the strip and the power source. You can connect LED light strips using connectors , cables or by soldering connections.
You can, but we don't recommend it. By cutting the LED strip in a place other than the designated cutting point, you risk damaging the elements on the strip itself. It is important to cut LED strips only on the specified cutting line between the indicating dots.
For the kitchen, we recommend standard LED strips of any length. It is worth choosing a warm, eye-straining color of the LEDs, with the option of dimming them. LED drivers such as BleBox ProxiDimmer also work great here.
The choice of LED for the bathroom is most often based on the brightness and color of the light. In general, LEDs marked as "daylight", whose color temperature is from 5000K to 6500K, or marked as "cool white" or "bright white", whose color temperature is from 3500K to 4100K, are suitable for bathrooms.
To some extent, yes, the LED strip does get hot. However, even if you use very strong diodes, the heating is much lower than with traditional light bulbs. LED does not burn, but the temperature of the outer housing of the LED is influenced by the temperature of the room and the fixture in which it is placed.
The most common causes of LED strip failure are power supply failure, installation errors, incorrect connection to the power supply, sticking the diodes on glass or plaster (don't do that), too long connections, low-quality LEDs, interference causing short high-voltage current pulses and moisture.
Make sure the total wattage of the LED strip is at least 20 percent less than the power supply's rated wattage. For example, if your LED strip requires 80 watts to operate, you will need a power supply with a power rating of at least 96 watts.
The discovery of asymmetric electrical conduction at the interface of a crystalline mineral and metal was made by Ferdinand Braun in 1874. The rectifier was renamed the diode in 1919 by the English physicist William Henry Eccles. We invite you to read the history of the LED on Botland Blog .
Tin the tip. Attempting to solder without a tinned tip is futile. Apply solder. Wipe off excess solder with a wet sponge, reapply a small amount of solder to the tip. The cleaner the surface, the better - remove dust, epoxies and other contaminants. If the high-power LED is to be placed on a heat sink (which is often the case), it is worth making the connections before mounting.
The easiest way to connect an LED strip is to use an appropriate mounting power supply , if necessary also using a matching driver .
The LED strip can be connected in the car using battery power supplies. You can also connect the tape directly to the vehicle's electrical installation, remembering to maintain the appropriate voltage and current parameters (if necessary, using appropriately selected resistors and other accessories ).
LED strips are usually self-adhesive. You can also use double-sided mounting tape or glue.