• EOL

ASTmidi - astronomic clock with GPS antenna - 3 outputs

Index: AST-14394

ASTmidi Astronomical Clock with three independently programmable and controlled outputs with a load capacity of 230 V / 5 A. The lighting controller can be controlled by means of a dedicated application via Bluetooth.

ASTmidi - astronomic clock with GPS antenna - 3 outputs
€197.90
€160.89 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: AST SYSTEM

Attention!

The product has been discontinued. Check other products incategory.

Product description: ASTmidi - Astronomical clock with GPS antenna - 3x 230 V / 5 A output.

ASTmidi is an advanced astronomical clock with a built-inGPSantenna. The controller is equipped with three independently programmable and controlled outputs with a load capacity of 230 V / 5A andan additional input to which we can connect a photocell or other external trigger. ASTmidi street lighting controller has a built-in function of recording600 recent eventssuch as switching on/off independently of each output and input and power loss and return. The device is mounted on a DIN rail.

Sterownik oświetlenia ulicznego ASTmidi

ASTmidi street lighting controller.

Functionality of ASTmidi street lighting controller

Thanks to the built-in antenna, the clock synchronises the time according to the GPS signal, so it canautomaticallyadapt to the seasons, without having to adjust the switching times manually. It is equipped with a switch-on table, which is fully editable and supportsup to 20 exceptions.Each setting can be corrected byits own correctionwithin +/- 240 minutes. There are also three predefined patches such as summer / winter, months and quarters. The controller itself switches between summer and winter time.

Podłączenie sterownika oświetlenia ASTmidi

Example of connecting an ASTmidi lighting controller.

Dedicated to the Astronomical Clock application

Thanks to a dedicated application driver, which was taken care of by the manufacturer, it is possible to control and configure the device from the phone, which significantly increases the comfort of use. Thanks to the built-in GPS antenna and application, it is possible to locate all ASTmidi devices on the map. From the phone or tablet, it is possible to fully configure parameters, times, exceptions, clock corrections, as well as receive all signals and messages from the phone or tablet, such as on/off, power outages and returns, switching times of individual outputs and inputs. It is also useful to save the current settings in the settings bank and send them via smartphone. The device can also communicate via Bluetooth.

Aplikacja ASTmobile

ASTmobile application.

Astronomical clock specification

  • Supply voltage 230 V AC / 50 Hz
  • supply voltage range: from - 20% to + 10%
  • 3 independently programmable and controlled outputs A, B and C, 5230 V / 5 A
  • 1 entrance
  • Contact connectors AWG14
  • 72 channel GPS receiver
  • GPS receiver sensitivity: -167 dBm
  • 5 years battery life
  • Bluetooth communication interface
  • Encrypted bidirectional transmission
  • IP 20 protection class
  • working temperature: from - 30°C to +80°C
  • dimensions - 53 x 95 x 58 mm
  • Mounting on a 35 mm DIN rail

Length 95 mm
Width 53 mm
Height 58 mm
Nominal output voltage 230 V AC
Case - For DIN rail yes
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: