Filament Print-Me Smooth ABS 1,75mm 0,2kg - Cherry Red

Index: PRI-17806 EAN: 5906190616975

Smooth ABS is a material that provides high quality three-dimensional prints. It is distinguished by its versatile use, intensive colour and relative ease of printing. Thanks to the Smooth ABSpillardiameter1.75 mmyou will be able to create models of varying degrees of complexity.

Filament Print-Me Smooth ABS 1,75mm 0,2kg - Cherry Red
€8.50
€6.91 tax excl.
Available
Shipping in 24 hours
PayPal payment
Print-Me Smooth ABS 1,75mm 0,2kg - colors:
Manufacturer: Print-Me

Description: Filament Print-Me Smooth ABS 1.75 mm 0.2 kg - Cherry Red

The Smooth ABS filter is a Cherry Red insert.for 3D printers. The net weight of the filament wound on the spool is 200 g. Anyone who is not familiar with the subject of additive technologies is well aware that for a printed model to have good detail and durability, it must be made of high-quality material. That is why it is worth betting on products of proven manufacturers. Smooth ABSis a material that provides high quality three-dimensional prints. It is distinguished by its versatile use, intensivecolour and relativeease of printing. Thanks to the Smooth ABS pillarCherry Red with diameter1.75 mmyou will be able to create models of varying degrees of complexity. This will work for most popular 3D printers for amateur home use and more.

Filaments

In our offer of filaments you will also find other materials and colors.

In our offer you will find more types of Phillips by Print-Me manufacturerin different colors, so you're sure to find exactly what you're looking for here. Our assortment consists of carefully selected filaments for different applications - check out our other suggestions! All materials are available from us at favourable prices.

Properties of Smooth ABS

  • Excellent adhesion between layers
  • Material for advanced users
  • Glossy surface after printing
  • No flossing effect
  • Perfectly smooth print surface
  • High dimensional accuracy of the printed component
  • Very high impact resistance and mechanical strength

Suggested print parameters for filament

Head temperature From 220°C to 260°C
Table temperature From 80°C to 120°C
Cooling the printout 0% to 30%

Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally.

Technical specifications and physical properties of the Print-Me Smooth ABS pillar

Parameter Scope
Diameter of pillar 1.75 mm
Dimensional tolerances of the philanthropy +/- 0,05 mm
Material surface Gloss
Density 1.01 g/cm3
Thermal resistance 90°C
Shore hardness 74D
Impact resistance for V notch 1.4 J/cm2
Young's module 2086 MPa
Retraction +/- 5 mm
Nozzle diameter ≥ 0,1 mm
Print speed From 30 to 80 mm/s
Material contraction 0,3 - 0,4 %
Product weight 200 g net
Material ABS
Vacuum packing Yes
Moisture absorber Yes

Colour red
Mass 200 g
Filament - material ABS
Filament - diameter 1.75 mm
Filament - Szpula Standard
Package width 16 cm
Package height 5 cm
Package depth 15 cm
Package weight 0.395 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: