- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Minicomputer Khadas VIM1 Pro with an efficient processorAmlogic S905X octa-core 64-bitARM Cortex AM53 1.5 GHzand the layout ARM Mali 450. It has2GB of DDR3 RAM,16GB of memory eMMC, integratedwi-fiandBluetooth 4.2 and2x USB 2.0 OTGtype A and one USB type-C connector,40 GPIO, microSD card connector, port Ethernet,HDMI, IR receiver and three buttons.
Operating systems
Minicomputer Khadas VIM2 works with the systemsAndroid, AndroidTV, LibreELEC, Ubuntu, DualOSandU-Boot. The system can be uploaded to the cardmicroSDor drectly on the internal memory of the minicomputer.
|
Operating systems can be downloaded fromthe manufacturer's website. |
What it takes to run minicomputer Khadas?
- AC adapter with USB connector type C- 5 V to 9 V (recommended 5V) with load current of 2 A
- HDMI cable- to connect the device to the monitor
- Mouse and keyboardfor control and input data into the device
Communication
Minicomputer has basic communication interfaces that can be found in computers of PC class. The user has at his or her disposal:
- two USB A connectors+USB type C, to which can be connected, for example, a mouse, keyboard or USB flash drive. If you find that the slots are too short, you can increase their number usingan external USB HUB.
- Gigabit Ethernet slot, that is, the possibility to directly connect to the LAN network.
- the wi-fi moduleallows communication with wireless network802.11 b/g/n/ac.
- Bluetooth 4.2 module -secure data transmission through the interface.
- GPIO x 40 pin -outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of engines. Among them are the pins supporting interfaces: I2C, I2S, SPDIF, UART, PWM, ADC, ISO7816, IOs.
- a slot for microSD - slot for memory card microSD on which can be installed the operating system.
- HDMI connector- it transfers image to the monitor.
Power
As a power source, the system uses a connectorUSB type C. The manufacturer recommends that the voltage indicated on the plug had a value of 5.0 and a minimum current efficiency of the used adapter shall not be less than 2.0 A. In our assortment, you will findpower supplies that meet these parameters, for example:the Extreme power supply 3.1 A.
Specification |
|
| Model | VIM1 PRO |
| Specification |
|
| Processor | Amlogic S905X |
| The core |
Quad-Core ARM Cortex A53 |
| Graphic processor | ARM Mali-450 |
| Systems |
Android, AndroidTV, LibreELEC, Ubuntu, DualOS, U-Boot |
| Clock frequency | 1.5 GHz |
| RAM |
2GB DDR3 64-bit |
| Memory |
16GB eMMC microSD card |
| GPIO slot |
40-pin GPIO |
| Power |
5 V / 2 A - USB type C - cable purchased seperately |
| Tile sizes | 82 x 57.5 x 11.5 mm |
| Interfaces | |
| USB-Host |
2x USB 2.0 type A |
| Network interface | Gigabit Ethernet |
| The Wi-Fi Interface | module wi-fi802.11 b/g/n/ac with antenna |
| Bluetooth interface | Bluetooth 4.2 |
| Video | HDMI 2.0 for a 4K 60fps |
| Audio |
HDMI |
| Communication |
UART, I2C, GPIO, I2S, PWM,SPDIF, ADC, ISO7816, IOs |
| Infrared |
2 channels IR |
| Buttons |
1x Power 1x Functional 1x Reset |
| Others |
status LEDs |
| Included |
- |
Useful links |
