- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Odyssey - X86J4125800 - Intel Celeron J4125 + ATSAMD21 8GB RAM - Seeedstudio 102110539
Odyssey X86J4125800 minicomputer equipped with Intel Celeron J4125 Quad-Core processor from 2.0 GHz to 2.7 GHz with Intel UHD 600 graphics system, and ATSAMD21 ARM Cortex M0+ coprocessor . It has 8 GB of LPDDR4 RAM , in addition, there is a WiFi dual band module and Bluetooth 5.0 on board. The board is equipped with two gigabit Ethernet connectors, three USB ports (2x USB 2.0 and 1x USB 3.1), audio inputs / outputs, a USB type C connector for power, an HDMI 2.0 connector and a SATA port, as well as two M.2 PCI- e. In addition, it has a slot for microSD and SIM cards.
Odyssey minicomputer - X86J4125800.
The Odyssey board has an integrated Arduino ATSAMD21 coprocessor.
Special features of the module
- Equipped with a quad-core Intel Celeron J4125 processor clocked from 2.0 GHz to 2.7 GHz.
- Supports WiFi wireless communication in the 2.4 GHz and 5 GHz band and Bluetooth 5.0.
- It has Intel UHD Graphics 600.
- Equipped with Dual Gigabit Ethernet, you can build OpenWrt and pfSense project with ease.
- With Odyssey - X86J4125 you can build your own NAS (Network-Attached Storage), high-performance virtual router or 4G LTE gateway for IoT applications.
- It has an integrated Arduino ATSAMD21 ARM Cortex M0+ coprocessor.
- The board is equipped with GPIO 40-pin connectors compatible with Raspberry Pi.
- Equipped with 2x M.2 PCIe connectors (Key B and Key M).
- Supports Windows 10 and Linux operating system - version X86J4125800 does not have built-in eMMC memory or pre-installed Windows 10.
- It is compatible with the Grove series ecosystem.
Communications in Odyssey
Odyssey X86J4125864 has been equipped with basic communication interfaces that can be found in typical PCs. The user has at his disposal:
- three USB type A connectors (2x USB 2.0, 1x USB 3.1) to which you can connect peripheral devices, such as a mouse and keyboard, as well as a USB drive to install the operating system. The number of ports can be extended using, for example, a USB HUB .
- two Gigabit Ethernet ports , which they give the ability to connect to the LAN using a cable, the maximum data transfer speed is 1000 Mb/s.
- 40-pin and 28-pin GPIOs - connectors compatible with Raspberry Pi and Arduino . They can be used to connect various sensors, diodes, motor controllers. They include popular interfaces, such as: I2C, SPI, UART.
- microSD / SIM / SATA / PCI-e slots allow you to place a SIM card for communication in the 4G network (with an optional overlay), microSD card, SSD or M.2 drive as a storage medium.
Board dimensions.
Pin placement.
Minicomputer power supply
Odyssey X86J4125864 has two connectors for power supply: USB type C and DC 5.5 / 2.1 mm . The USB C connector supports Power Delivery, the voltage of the power supply should be 15 V , and in the case of power supply via the DC 5.5 / 2.1 mm connector, the voltage should be in the range of 12 V to 19 V. The set includes a power supply with a DC 5.5 / 2.1 mm connector.
Kit contents
- Odyssey minicomputer - X86J4125864
- Power Supply
- SATA cable
- Antenna x2
- RTC battery
- Radiator - built-in
Odyssey minicomputer specification and comparison
| TECHNICAL SPECIFICATIONS | ||
|---|---|---|
 |
 |
|
| Model | Odyssey X86J4105800 - 102110399 | Odyssey X86J4125800 - 102110539 |
| BASIC INFORMATION | ||
| Processor |
Intel Celeron J4105 |
Intel Celeron J4125 |
| coprocessor | ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
| Graphics |
Intel UHD Graphics 600 |
Intel UHD Graphics 600 |
| RAM | LPDDR4 8GB | LPDDR4 8GB |
| Internal storage | lack | lack |
| Operating system | Windows, Linux | lack |
| wireless communication | WiFi 802.11 a/b/g/n/ac dual band 2.4GHz / 5GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4GHz / 5GHz HT160 Bluetooth 5.0 |
| Network | Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
| Dimensions | 110x110mm | 110x110mm |
| INTERFACES | ||
| Audio |
3.5mm jack |
3.5mm jack |
| Connectors |
1x 40-pin compatible with Raspberry Pi |
1x 40-pin compatible with Raspberry Pi |
| USB |
2x USB 2.0 type A |
2x USB 2.0 type A |
| Video |
HDMI 2.0a: up to 4096 x 2160 pixels / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 pixels / 60 Hz 24 bpp |
| Expansion slots |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 |
M.2 (Key B, 2242/2280): SATA III, USB 2.0, UIM |
| RTC | JST 1.0 CR2032 3V (Included) | JST 1.0 CR2032 3V (Included) |
| TPM | Embedded TPM(2.0) | Embedded TPM(2.0) |
| Power | DC Jack 5.5/2.1mm or USB Type-C PD DC Jack: 12V to 19V/2A USB Type-C: 12V/2A |
DC Jack 5.5/2.1mm or USB Type-C PD DC Jack: 12V to 19V USB Type-C: 15V |
