- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
Humidity sensor powered with the voltage from the range of 4 to 5.8 V (nominally 5V). It consumes the current of up to 200uA. The output is an analog signal proportional to the measured relative (measured in % RH) air humidity. Data can be read via analog-to-digital converter, for example, by connecting to the analogArduino pins.
The product is compatible with Arduino On the website bildr.org, you can finda guide that shows how to connect the sensor to Arduino. |
Pins are the solder fields for soldering the goldpin connectors - pitch of 2.54 mm. Thanks to them, it is possible to connect the system with the breadboard or the main module using wires. The set does not include the goldpin connectors, you can purchase them separately.
Settings
- Power supply: from 4.0 to 5.8 V
- Current consumption: approx. 200 uA
- Output: analog signal
- The characteristic is close to linear
- Short response time
- Module dimensions: 20 x 8 mm
Details can be found inthe documentation for the sensor.
*RH - relative humidity is expressed in percents. It is the ratio of actual humidity in the air to its maximum number that air can keep at a given temperature.
Useful links |