Description: Rosa3D ReFill PLA Starter Filament 1,75 mm 1 kg - Carmine Red
Filament of biodegradable biopolymer in carmine red color. PLA Starter line was prepared with a view to beginners 3D printers users. The material is characterized by great ease of printing while maintaining high detail of the formed 3D models. PLA Starter shows low shrinkage and good adhesion of the first print layers. During melting it does not emit an unpleasant smell. The diameter of the filament is 1,75 mm. Weight of the material is 1 kg.
In our offer of filaments you will also find other materials and colors.
Filaments used in 3D printing.
Additional information about PLA
- Ideal choice for beginners
- Environmentally safe product, made of biodegradable biopolymer
- Good adhesion between layers
- High accuracy and detail of the printed piece
- Filament has been produced from ingredients approved for contact with food. However, it should be remembered that in the case of products that come into contact with food, the responsibility of certification rests with the manufacturer of the final product
- PLA Starter Filament can be used in 3D printers not equipped with unheated workbenches. If problems with adhesion are noted, use an adhesion promoter
| Head temperature | From 190°C to 225°C |
| Table temperature | From 40°C to 60°C |
| Print cooling | 70% to 100% |
| Recommended print speed | From 60 mm/s to 80 mm/s |
|
Due to differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Filament Rosa3D ReFill PLA Starter 1,75 mm 1 kg - Carmine Red.
Technical specification of PLA Starter Filament
| Parameter | Range |
|---|---|
| Dimensional tolerance of the filament | +/- 0,05 mm |
| Dimensional tolerance of oval | +/- 0,02 mm |
| Heat distortion temperature | 55°C (ASTM E2092) |
| Density | 1,24 g/cm3 |
| Tensile elongation | 6% (ASTM D882) |
| Tensile Strength (Breaking) | 53 MPa (ASTM D882) |
| Modulus of elasticity | 3500 MPa (ASTM D882) |
| Odour | odourless |
| Material | biodegradable biopolymer |
| Diameter | 1800 mm |
| Width | 55 mm |
| Mounting hole diameter | 93 mm |
| Vacuum packing | Yes |
| Moisture absorber | Yes |
| Product weight | 1 kg net weight |
