- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Lanberg natural gas and coal gas sensor SR-1006 230 V + 9 V emergency power supply
TheLanberg branded white electrochemicalgas sensoris designed to detect flammable gases such as natural and coal gas. The device is very sensitive to gas leaks in buildings such as kitchens or boiler rooms. It is poweredfrom 230 V to 250 V, power consumption is 1.9 W. The appliance has a 1.35 m long cablewitha flat mains plug. In addition, for safety reasons, the sensor can be connected to an emergency power supply in the form ofa 6F22 batterywith 9 V (not supplied). The sensor emits a linear sound signal of about85 dBimmediately after detecting gas that exceeds the permitted level.
|
The 6F22 9 V battery can be purchased separately in our shop. Before connecting the sensor, please read the user manual included in the set. |
Lanberg natural gas and coal gas sensor SR-1006 230 V.
Safe installation
If we want the sensor to detect:
- Natural gas: Mount the sensor on the wall in a place at least 50 cm from the ceiling and 1.5 meters from the gas source (natural gas is lighter than air)
- Compressed natural gas or coal gas: the sensor is mounted on the wall at a distance of approximately 30 cm (or less) from the ground and at a distance of 1.5 m from the LPG source (the gas components are propane or butane, i.e. gases heavier than air).
Set contents
-
Lanberg gas sensor SR-1006
- Mounting screws and studs
- Operating instructions
Lanberg natural gas and coal gas sensor SR-1006 230 V.
Gas sensor specification
- Manufacturer: Lanberg
- Colour: white
- Supply voltage: 230 V to 250 V / 50-60 Hz
- Power consumption: 1,9 W
- Separate power supply possible: 9 V 6F22 battery compartment (not included)
- Rated battery voltage: 9 V 6F22
- Operating temperature: 0°C to +50°C
- Permissible humidity: 10% to 95% RH
- Compliance with EU standard: EN 50194-1:2009
- Alarming gas level: 2500 PPM (+/- 1500 PPM)
- Volume / effective alarm signal range: 85 dB/1 m
- Cable length: 1,35 m
- Product dimensions: 112 x 73 x 42 mm
Useful links |
