- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product Description: 360 degree laser scanner D300 - UART - 12m - Waveshare 22098
Laser scanner using ToF (Time of Flight) technology based on distance measurement according to the flight time of a laser pulse. Effectively detects objects at a distance of up to 12 m . The accuracy of the reading is ± 45 mm (it does not change with increasing distance). Efficient algorithm enables 360 ° scanning, autonomous mapping and obstacle detection. The device for communication uses UART .
360 degree laser scanner D300 - UART - 12 m - Waveshare 22098 .
Illustration of 360 ° scanner operation .
360 ° omnidirectional laser scanning
Lidar rotates clockwise to measure distance and allow 360 ° scanning. In this way, it obtains information about the point cloud and the location of obstacles as well as a contour map of the surrounding environment.
Long service life of the device
In the scanner, the manufacturer used a high-quality brushless motor that allows the scanner to rotate. It ensures quiet and precise operation and a long service life (even over 10,000 hours of operation).
Large measuring range
The D300 laser scanner enables measurements at a distance of up to 12 m. Provides a large mapping area. It can be used as a sensor in moving robots.
Immunity to light disturbances
The efficient control system and the optical structure of the device allow to eliminate strong light disturbances. They are resistant to strong light of 30,000 lux.
The measuring range of Waveshare 22098 is up to 12 m .
Project example. Chassis not included .
FDA Class 1 laser
In Lider, to ensure maximum safety of use, the manufacturer used a low-energy infrared laser emitter as a light source. The laser is FDA Class 1.
Compatible dimensions
Thanks to its small dimensions, Waveshare 22098 can be used in many types of projects. Low weight and low energy consumption allow the installation of lidars in, among others, moving robots.
Technical specification 360 degree laser scanner D300 - Waveshare 22098
| Technical Specifications | |
|---|---|
| Supply voltage: | 5 V |
| Working Current: | 180 mA |
| Device power: | 0.9 watts |
| Measure range: | from 0.02 m to 12 m |
| Viewing angle: | 360 ° |
| Scanning frequency: | 5 Hz to 13 Hz (typical: 10 Hz) |
| Average measurement accuracy: | ± 45 mm (in the range from 0.3 m to 12 m) |
| Laser class: | FDA Class 1 |
| Laser Wavelength: | 895 nm to 915 nm (typical: 905 nm) |
| Measurement frequency: | 4500 Hz |
| Resolutions: | 15 mm |
| Communication interface: | UART @ 230400 |
| Ambient Light Immunity: | 30 Klux |
| Working temperature: | -10 ° C to 40 ° C |
| Service life: | over 10,000 hours |
| Dimensions: | 54 x 46.29 x 34.8 mm |
| Mass: | 47 g |
Kit contents
- 360 degree laser scanner D300 - UART - 12m - Waveshare 22098: 1 pc.
- Adapter: 1 pc.
- USB cable (500 mm): 1 pc.
- 4-pin cable (100 mm): 1 pc.
Laser scanner, Lidar - Waveshare 22098
