- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Motor Control Board L293D - 36 V / 0.6 A motor controller
The module allows you to control two DC motors or one stepper motor at a time. The system allows you to adjust the direction of rotation of motors with current consumption up to 600 mA and supply voltage up to 36 V.

Product compatible with Arduino The manufacturer has prepared a user guide with asample program for Arduino and STM32. |
Exits
The device has a 6-pin goldpin connector and 6 screw connectors.
Pin | Description |
---|---|
VCC | Power supply voltage: 5 V. |
GND | The weight of the system. |
M1B/M1A | Check the direction of rotation of the first engine. |
M2B/M2A | Check the direction of rotation of the other engine. |
Screw connections + / - |
Motor supply voltage. |
Screw connection M1 / M2 |
Outputs to connect the motor poles. |
Jumper |
Allows you to select the motor supply voltage. VCC and + from the screw connector are available. |
Module Truth Table
M1A/M2A |
M1B/M2B |
M1/M2 |
---|---|---|
state |
state low |
Contrary to the instructions / Clockwise |
state low |
state high |
As directed by the instructions / Opposite to the clockwork |
state high |
state high |
Detained |
state low |
state low |
Detained |
Specification
- Module supply voltage: 5 V
- Operation of motors with voltages from 4.5 V to 36 V
- Controller: L293D(documentation)
- No PWM signal output
- Number of engines supported: 2
- Maximum current per channel: 600 mA
Useful links |