- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Motherboard for Creality Ender-5 Plus - Creality 3D printer
Motherboarddesigned for the CrealityEnder-5 Plus3D printer. The element is anoriginal componentmanufactured by one of the most popular printer manufacturers - Creality. The code designation of the motherboard isV2.2. The subassembly was equipped with high-qualityTMC2208motordrivers, thanks to which the printer works muchsmootherandquieter. Each controller also has an efficient cooling system, for which theheat sinkslocated on the individual elements are responsible. The printer driver is powered by24 V, the maximum current is approximately 20 A.
Motherboard for the Creality Ender-5 Plus 3D printer.
Description of the elements on the motherboard for the 3D printer - Creality.
Original Creality Ender-5 Plus motherboard
The subject of the sale is the original motherboard in versionV2.2, compatible with Creality Ender-5 Plus 3D printers. A fullyintegrated version, equipped with high-qualityTMC2208stepper motor drivers, which positively affect the operation of the printer - they increase its smoothness and reduce the noise level. The drivers were mounted together with the heat sinks directly on the printed circuit board - so there is no need to insert the StepStick drivers into the markedslots.
Electronics designed for the Creality printer have been created with attention to every detail. The designers also made sure that it waseasy to install. The PCB surface of the motherboard has markings of individual elements and placed connectors, thanks to which it is much more difficult to make a mistake when connecting the wires.
Mainboard for the Ender-5 Plus
The board has four motor connectors - X, Y, Z - responsible for the movement in a given axis, an extruder drive connector and a slot for microSD memory cards. On the opposite side, there are 2-pin connectors for connecting the X, Y and Z axis limit switches, fan sockets and also thermistor, power, nozzle and heatbed sockets. The motherboard for the 3D printer also has a miniUSB connector for communication with a computer and an IDC connector for the LCD display.
All components of the motherboard are firmly attached so that immediate installation is possible.
Equipped with a miniUSB connector for communication with a computer.
Technical specification of the motherboard
- Compatible with 3D printers: Ender-5 Plus, CR-10 S4, CR-10 S5, CR-20 Pro (SV01), CR-X, XR-XB, CR-10S, CR-20
- The original component from the manufacturer of 3D printers - Creality
- Nominal voltage (supply): 24 V
- Maximum current: 20 A
- Rated voltage: input 115V / 230V
- Maximum power: 270 W
- Element dimensions: 85 x 105 x 20 mm
