Product description: Filament Rosa3D PETG Standard HS 1.75 mm 1 kg - Pearl Gold
Filament (polyethylene terephthalate with an admixture of glycol) in a pearl gold color. During printing, PETG Standard shows good adhesion of the first print layers to the surface of the heating bed, does not emit unpleasant odors, and also has a low level of shrinkage. Ready 3D models made of this material are characterized by high detail and chemical resistance. They can undergo further processing (sandblasting, sawing). The filament diameter is 1.75 mm . The weight of the thermoplastic on the spools is 1 kg .
In our offer of filaments you will also find other materials and colors.
Filaments used in 3D printing .
More information about PETG Standard
- Due to the ease of printing, the filament is the optimal solution for both beginners and more advanced users
- It does not emit any unpleasant odors during printing
- PETG Standard shows good adhesion of the first print layer with the heating bed
- High accuracy and detail of 3D printed models
- The filament is made of ingredients approved for contact with food. However, it should be remembered that in the case of products that come into contact with food, the obligation to certify lies with the manufacturer of the final product
- Ready models made of PETG Standard are characterized by high chemical resistance. Can be further processed (sandblasted, drilled, sawn, sanded, cut, painted) without compromising the structural integrity of the element
Suggested printing parameters
| Head temperature | 220 ° C to 250 ° C |
| Table temperature | From 60 ° C to 80 ° C |
| Cooling the print | 0% to 60% |
| Recommended print speed | From 60 mm / sec to 80 mm / sec |
|
Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Filament Rosa3D PETG Standard HS 1.75 mm 1 kg - White.
Technical specification of the PETG Standard filament
| Parameter | Range |
|---|---|
| Colour | Pearl Gold (pearl gold) |
| Filament dimensional tolerance | +/- 0.05 mm |
| Oval dimensional tolerance | +/- 0.02 mm |
| Thermal deformation temperature | 78 ° C (ISO 306) |
| Density | 1.29 g / cm 3 |
| Tensile strength (breaking) | 20 MPa (ISO 527-2) |
| Modulus of elasticity | 2980 MPa (ISO 572-2) |
| Izod impact strength (notched) | 4.7 kJ / m 2 (ISO 180) |
| HDT | 78 ° C (ISO 306) |
| Flame rating | V2 UL94 (4.0mm) |
| Smell | odorless |
| Material | PETG |
| Spool diameter | 200 mm |
| Spool width | 55 mm |
| Mounting hole diameter | 52 mm |
| Vacuum packing | Yes |
| Desiccant | Yes |
| Product weight | 1 kg net |
