Adafruit VEML6070 UV Index Sensor Breakout
Adafruit VEML6070 UV Index Sensor Breakout
Adafruit VEML6070 UV Index Sensor Breakout
Adafruit VEML6070 UV Index Sensor Breakout
Adafruit VEML6070 UV Index Sensor Breakout - zdjęcie 1
Adafruit VEML6070 UV Index Sensor Breakout - zdjęcie 2
Adafruit VEML6070 UV Index Sensor Breakout - zdjęcie 3
Adafruit VEML6070 UV Index Sensor Breakout - zdjęcie 4

VEML6070 UV Index Sensor Breakout - Adafruit 2899

Index: ADA-06569 EAN: 5904422354459

Module with UV sensor adding the possibility to detect UV light to any microcontroller. It has a built in converter A/C controlled by the I2C bus that reads and processes the data for 60 MS to 500 MS. It is powered with the voltage from 2.8 V to 5.5 V.

€7.47
€6.07 tax excl.
Goods pending acceptance - available within a few days
Waiting for delivery
30-day returns
PayPal payment
Manufacturer: Adafruit
Compatibility: Arduino

Description

Module with UV sensor adding the possibility to detect UV light to any microcontroller. It has a built in converter A/C controlled by the I2C bus that reads and processes the data for 60 MS to 500 MS.

Unlike moduleSi1145, VEML6070 does not give readingsto UV index. It has a light sensor operating in the UV spectrum. It is equipped with a simple I2C interface, thus it can run on microcontrollers with a small performance.

Pins

The sensor has 5 pins working with voltage from 3 V to 5 V. It is communicating with each microcontroller equipped with the I2C bus.

 06569_3b.jpg

 

Pin Description
VIN Supply voltage: from 2.8 V to 5.5 V.
G The ground of the system.
SCL Clock line of  the I2C bus.
SDA The data line of the I2C bus.
ACK The interrupt's output. It warns about too high or low UV signal.

 

A detailed description can be found in the user manual.

Specification

  • Supply voltage: from 2.8 V to 5.5 V
  • The operating voltage of the pins: from 3.0 V to 5.0 V
  • Chip: VEML6070
  • The range of spectrum of UV radiation: from 320 nm to 410 nm
  • Communication: I2C bus
  • Pins: the holes for the goldpin connectors - 2.54 mm pitch (strap included in the kit for self soldering)
  • Board sizes: 14 x 13 x 2 mm
  • Weight: 0.5 g

 

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Dust sensor / particle concentration - GP2Y1010AU0F air purity monitor + module - Waveshare 10500

Dust sensor allows you to monitor the purity of the air. It is equipped with the Sharp GP2Y1010AU0F sensor, it allows to detect particles with diameter of more than 0.8 µm, for...
Index: WSR-04480
Index: WSR-04480
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.86 Price €13.86

BME280 - digital sensor of humidity, temperature and atmospheric pressure I2C/SPI - SparkFun SEN-13676

Digital sensor allows to measure atmospheric conditions, i.e. temperature from -40 °C to 85 °C, humidity from 0 to 100 %Rh and pressure from 300 hPa to 1100 hPa . The last...
Index: SPF-04901
Index: SPF-04901
Waiting time approx. 4-6 weeks
Regular price €21.78 Price €21.78

Rain sensor module YL-83

The sensor is used to detect precipitation. It is powered with the voltage of 5 V. It has digital and analog output, making it compatible with most of the commissioning...
Index: MOD-01732
Index: MOD-01732
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.18 Price €2.18

PIR HC-SR501 motion detector - green

Sensor, type PIR, can detect movement. Used to detect objects in the premises, alarm and lighting systems. The sensor is supplied with the voltage from 4.5 to 20 V. The...
Index: MOD-01655
Index: MOD-01655
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.85 Price €1.85

Bluetooth Low Energy module (BLE 4.0) - NRF51822 - Waveshare 9515

The communication module working in the Bluetooth BLE 4.0 standard at a distance of up to 30 meters. Unlike classic BT, BLE has no legal restrictions, iOS apps can be freely...
Index: WSR-04505
Index: WSR-04505
Delivery scheduled for 2022-02-15
Regular price €7.92 Price €7.92

Temperature and humidity sensor DHT11 - module Iduino SE052

Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH. It has connectors for connecting the sensor...
Index: WSR-04918
Index: WSR-04918
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.18 Price €2.18

Bluetooth Low Energy module (BLE 4.0) - NRF51822 - mini version - Waveshare 10649

The communication module is working in the Bluetooth BLE 4.0 standard at a distance of up to 30 meters. Unlike classic BT, BLE has no legal restrictions, iOS apps can be freely...
Index: WSR-04463
Index: WSR-04463
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.24 Price €9.24

Solar cell 0,7W/5,5V 95x95x3mm

A 0.7 W solar cell with an output voltage of 5.5 V. The dimensions of the plate are: 95 x 95 x 3 mm . The outputs are pads for solder cables.
Index: AKU-03695
Index: AKU-03695
Available, 24h shipping!
(Check quantity)
Regular price €3.50 Price €3.50

WiFi module ESP-07 ESP8266 - 9 GPIO, ADC, ceramic antenna + u.FL connector

WiFi module based on ESP8266 chip. It operates in 802.11 b/g/n WiFi standard at 2.4 GHz. It is equipped with 16 outputs - 2 mm raster, 9 of which are GPIO and 1 ADC. It has a...
Index: MOD-03976
Index: MOD-03976
Unavailable
Regular price €3.94 Price €3.94
  • EOL

Power supply Akyga microUSB 5V 2A Raspberry Pi 2/B+

Adapter with microUSB connector compatible with minicomputer Raspberry Pi with maximum load current of 2 A.
Index: ZAS-04128
Index: ZAS-04128
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.43 Price €5.43

Raspberry Pi 3 model B WiFi Bluetooth 1GB RAM 1,2GHz

A new edition of the popular minicomputer Raspberry Pi version 3. This model features a more powerful processor Broadcom BCM2837 quad-core 64-bit ARM-8 Cortex-A53 with a clock...
Index: RPI-05576
Index: RPI-05576
Waiting for confirmation of delivery date
Regular price €50.38 Price €50.38

Arduino Yun - WiFi + Ethernet

Connection of Arduino and Linux allows to program and control the device wirelessly via WiFi network. Module based on ATmega32u4 chip , has 32 kB of flash memory, 2.5 kB of...
Index: ARD-01859
Index: ARD-01859
Unavailable
Regular price €65.78 Price €65.78
  • EOL

Products from the same category

Grove - digital flame sensor 760-1100nm

Sensor used for detecting fir. Is supplied with the voltage from 4.75 V to 5.3 V. Range of detectable waves from 760 nm to 1100 nm. The output is a digital signal....
Index: SEE-11311
Index: SEE-11311
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.99 Price €0.99
  • On sale!

Light control sensor MCE34 - 2000W

The sensor is used to turn on and off lights depending on the brightness level of the environment. Its operation i not influence neither by the temperature nor by the...
Index: MOD-07010
Index: MOD-07010
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €5.92
  • Reduced price
  • On sale

Light sensor LDR resistive for Arduino - Okystar

The LDR digital light sensor module is very sensitive to ambient light. Usually used to detect the brightness and intensity of ambient light. The signal detection...
Index: OKY-16560
Index: OKY-16560
Available, 24h shipping!
(Check quantity)
Regular price €1.08 Price €1.08

VL6180X time-of-flight - distane and ambient light sensor I2C - Pololu 2489

A digital sensor combining time-of-flight proximity measurement and the ability to measure ambient light intensity. It operates up to 10 cm with a resolution of 1 mm. It...
Index: PLL-04856
Index: PLL-04856
Available, 24h shipping!
(Check quantity)
Regular price €7.68 Price €7.68

Ultraviolet UV light sensor - analog module - Waveshare 9537

The ultraviolet sensor powered with the voltage from 3.3 V to 5 V. The output is an analog voltage, proportional to the intensity of UV light. The sensor can be used to detect...
Index: WSR-04934
Index: WSR-04934
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €6.58
  • On sale!

Photoresistor analog - Iduino SE012

Module with photoresistor for Arduino. It is controlled via an analog signal, powered with the voltage from 3.3 V to 5 V.
Index: DNG-11885
Index: DNG-11885
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.19 Price €1.19

TEMT6000 - analog light intensity sensor module - SparkFun BOB-08688

An analog sensor measures the ambient light intensity. It works just like a regular transistor - the greater the intensity of the incident light, the higher the output voltage....
Index: SPF-02260
Index: SPF-02260
Waiting for confirmation of delivery date
Regular price €4.95 Price €4.95

Grove - UV sensor - analog module

UV sensor with voltage supply from 3.3 V to 5 V. Output analog voltage, proportional to the intensity of UV radiation. The sensor can be used to detect harmful solar radiation.
Index: SEE-08307
Index: SEE-08307
Delivery scheduled for 2022-01-23
Regular price €9.02 Price €9.02

IoT Starter Kit with Blynk Board - SparkFun KIT-14682

Starter kit SparkFun IoT is an introduction to the world of Internet of Things (IoT). It allows, i.a. for monitoring the local weather conditions, providing information about...
Index: SPF-14181
Index: SPF-14181
In stock, shipping 24 hours!
(Check quantity)
Regular price €70.18 Price €35.09
  • Reduced price
  • On sale

Color sensor, light transducer - frequency TCS3200D - module Iduino ME069

Module with color sensor enables a measurement of the RGB components, the output is the frequency which depends on the intensity of light of the selected color. It  i s...
Index: MOD-01477
Index: MOD-01477
Delivery scheduled for 2022-01-30
Regular price €8.78 Price €8.78

DFRobot Gravity - VEML7700 digital ambient light sensor - I2C

The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
In stock, shipping 24 hours!
(Check quantity)
Regular price €10.78 Price €10.78

Dark activated birghtness changing night light Kit - Kitronik 2120

The night light kit with dusk sensor, equipped with a potentiometer, allows you to adjust the sensitivity of the module. The device is powered by 4 AA batteries. The board's...
Index: KTR-16120
Index: KTR-16120
Waiting for confirmation of delivery date
Regular price €3.41 Price €3.41