- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Notifier of the air quality. It has no sensor of the air. It connects with the LookO2 servers and allows you to read data from any sensor LookO2 V3, and then indicates air quality via color of the built-in RGB LEDs. It is an addition of the module LookO2. It is powered by 5V voltage via the microUSB, what allows you to use any charger or powerbank.
Connection
To start the device, you must connect the power supply - the manufacturer recommends to use apower supply with a voltage of 5 V and not less than 2 A. LookO2 Connector will flash with white light, what means waiting for a wi-fi setup. Connect with them by typing in the browser, the address - 192.168.4.1. On the website, is a form to fill with the following fields:
- Select wi-fi Network: local WiFi network to connect
- AP Password: the password for the wi-fi network
- LookO2 ID: sensor ID, from which the notifier will load the data. You need to download it fromthe manufacturer's website.
- Choose LED Brightness: select brightness of illumination of devices
After pressing the Save Connector, it will reboot. The device receives data from the server up to 15 minutes.
Map of the sensors that are currently operating in Poland.
|
Detailed job description can be found inthe user guide. |
Specification
- Supply voltage: 5 V
- Current consumption: up to 500 mA
- Operating temperature: 0 °C to 50 °C
- Device dimensions: 52 x 50 x 35 mm
Useful links |
