- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
Sensor used for detecting fir. Is supplied with the voltage from 4.75 V to 5.3 V. Range of detectable waves from 760 nm to 1100 nm. The output is a digital signal. Detection range from 0 m to 1 m. Device operates in temperatures from -25 °C to 85 °C.
Despite the fact that the module detects fire, it is not have fire protection. You need to keep distance from the fire to prevent the board from damage. |
Sensor maintenance
The sensor communicates with the interface to the digital 0 and 1, in the case of flame detection indicates 0. Frequency regulated with a potentiometer.
Attention! This product is only available in our market in Poland and cannot be sold to other countries. |
Pin | Description |
---|---|
VCC | Power supply voltage: 4.75 V to 5.3 V. |
GND | The ground of the system. |
NC | Not connected. |
SIG | The sensor signal. |
The product is compatible with Arduino The manufacturer has prepared a user guide along with an exemplary program for Arduino. |
Specification
-
Voltage: 4,75 V to 5.3 V
- Rangeof detectable waves from 760 to 1100 nm
- Response time: 15 µs
- Operating temperature: -25 to 85 °C
- Module dimensions: 27.3 x 15.4 mm
Useful links |