- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
The board was designed to provide the best combination of good performance and flexibility. TSH82 has two levels of amplification, each of which is independently accessible through an input. Each level is initially configured as a reversible amplifier. It can be powered by single voltage 4.5 V to 12 V or bipolar from 2.25 V to 6 V.
With jumpers on the back of the board, you can further customize each level for irerevrsible operations, differential input and feedback to the input CURRENT. Explains the setup turns a profit -4,7 and bandwidth of almost 10 MHz. Input signals are connected to electric AC capacitors 1.0 uF, and the input resistance is 10 K at low cut-off frequency of 15.9 Hz.
Iputs
Circuit Board has 9 terminals in the form of holes, allowing for soldering goldpincontacts.
| Pin | Description |
|---|---|
| VCC | Supply voltage from 4.5 V to 12 V. |
| VEE | The ground of the system. |
| Vref | It can be refered to any voltage between VCC and VEE. |
| +IN1 | Input + of channel 1. |
|
-IN1 |
Input - of channel 1. |
|
OUT1 |
The output of channel 1. |
|
+IN2 |
Input + of channel 2. |
|
-IN2 |
Input - of channel 2. |
|
OUT2 |
The output of channel 2. |
Specification
- Power supply:
- single: 4.5 V to 12 V
- bipolar: + / - 2,25 V to +/- 6 V
- Disposition: TSH82
- Dimensions: 27 x 24 mm
Useful links |
