12V / 1.6A DVE Switch Mode Power Supply Unit - 4.8 / 1.7 mm DC plug
12V / 1.6A DVE Switch Mode Power Supply Unit - 4.8 / 1.7 mm DC plug
12V / 1.6A DVE Switch Mode Power Supply Unit - 4.8 / 1.7 mm DC plug - zdjęcie 1
12V / 1.6A DVE Switch Mode Power Supply Unit - 4.8 / 1.7 mm DC plug - zdjęcie 2

DVE impulse power supply 12V/1,6A - DC 4,8/1,7 mm socket

Index: ZAS-01812

Power supply unit. Power supply voltage: 100 V - 240 V. Output voltage: 12 V DC. Output current: up to 1.66 A. Connector 4.8 / 1.7 mm.

€2.53
€2.06 tax excl.

Unavailable
Discontinued product
30-day returns

Attention!

The sale of the product has been completed. Check other devices in this category.

Specification

  • Power supply voltage: 100 V - 240 V
  • Output voltage: 12 V DC
  • Output current: 1,66 A
  • Cable length: 180 cm
  • Housing dimensions without plug: 73 x46 x 34 mm
  • Plug diameter: 4.8 /1.7 mm
  • Plug type: angular
  • Plug polarity: plus in the middle / minus outwards

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

Customers who bought this product also bought:

AVR microcontroller - ATmega8A-PU DIP

Microcontroller from Atmel AVR 28-leg DIP case. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 B of EEPROM.
Index: UCC-00078
Index: UCC-00078
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.60 Price €1.60

AVR microcontroller - ATmega16A-PU - DIP

Popular microcontroller AVR from Atmel in a DIP case.
Index: UCC-00115
Index: UCC-00115
Czas oczekiwania: ok. 10-30 dni
Regular price €5.33 Price €5.33

AVR microcontroller - ATtiny2313A-PU

Atmel microcontroller AVR in 20-led DIP case. Voltage supply range from 1.8 V to 5.5 V, with a clock signal frequency to 20 MHz, has a 2 KB Flash, 128 B RAM, 128 B EEPROM.
Index: UCC-00163
Index: UCC-00163
Czas oczekiwania: ok. 10-30 dni
Regular price €2.09 Price €2.09

Goldpin plug 1x40 straight 2.54mm pitch

Goldpin male 1x40 strap, pitch is 2.54 mm.
Index: KAB-00192
Index: KAB-00192
Unavailable
Regular price €0.16 Price €0.16

Drill 0,8mm - 10pcs

A set of 10 drills for metal and hole making in printed circuit boards.
Index: NSZ-00233
Index: NSZ-00233
Waiting time: about 10-30 days
Regular price €2.30 Price €2.30

Lithium Battery CR2032 3V

CR2032 lithium battery with a nominal voltage of 3 V and a capacity of 249 mAh, used e.g. as a power source for low-current systems.
Index: BAT-00812
Index: BAT-00812
Unavailable
Regular price €0.19 Price €0.19

Single Row 1x40 raster 2,54mm - female

Single-row, female slat. Raster : 2.54 mm.
Index: KAB-01103
Index: KAB-01103
Available, 24h shipping!
(Check quantity)
Regular price €0.21 Price €0.21

Battery storage case for 3 packs AAA (R3)

Basket for three AAA batteries (small fingers).
Index: AKC-01650
Index: AKC-01650
Waiting time: about 10-30 days
Regular price €0.33 Price €0.33

A4988 - stepper motor driver RepRap 35V / 2A - Pololu 1182

Stepper motor driver based on the A4988 system. Voltage supply in the range of 8 to 35 V with maximum current consumption of 2 A per coil. Maximum resolution: 1/16 of a step....
Index: PLL-00148
Index: PLL-00148
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.33 Price €5.33

IDC 10 pin socket for tape - 5pcs

10-pin IDC slot clamped on the tape (pitch: 2.54 mm). Price is for 5 pieces.
Index: KAB-00190
Index: KAB-00190
Czas oczekiwania: ok. 10-30 dni
Regular price €0.35 Price €0.35

Strip cable 16 wires gray (50 cm) IDC raster 1.27mm

IDC 16-wire ribbon cable. Raster: 1.27 mm.
Index: KAB-00195
Index: KAB-00195
Unavailable
Regular price €0.28 Price €0.28

Belt cable 14 wires gray (50 cm) IDC raster 1.27mm

IDC 14-wire ribbon cable. Raster: 1.27 mm.
Index: KAB-00290
Index: KAB-00290
Unavailable
Regular price €0.26 Price €0.26

Products from the same category

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98

Micro-Match connector - 10 pin socket

Micro-Match connector for 10-pin printing.
Index: UCC-00283
Index: UCC-00283
Unavailable
Regular price €0.21 Price €0.21

Micro-Match connector for 10-pin tape

Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.
Index: UCC-00285
Index: UCC-00285
Unavailable
Regular price €0.91 Price €0.91

Pololu LPY550AL 2-axis XZ gyroscope

A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
Unavailable
Regular price €15.12 Price €15.12

3-axis magnetometer, digital MAG3110

3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.
Index: SES-00964
Index: SES-00964
Unavailable
Regular price €1.86 Price €1.86

HiTechnic color sensor - for Lego Mindstorms EV3 and NXT

The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.
Index: ROB-00982
Index: ROB-00982
Unavailable
Regular price €55.58 Price €55.58

Servomechanism - Lego Mindstorms NXT

The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.
Index: ROB-00986
Index: ROB-00986
Unavailable
Regular price €32.33 Price €32.33

USB Bluetooth adapter - Lego Mindstorms NXT

Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.
Index: ROB-00987
Index: ROB-00987
Unavailable
Regular price €39.30 Price €39.30

Gift voucher - PLN 50

Gift certificate worth PLN 50.
Index: BON-01044
Index: BON-01044
Unavailable
Regular price €11.63 Price €11.63

Gift Card - 300zł

Gift certificate worth PLN 300.
Index: BON-01045
Index: BON-01045
Unavailable
Regular price €69.77 Price €69.77

Receiver module GPS-FGPMMOPA6H GPS

Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.
Index: UCC-01233
Index: UCC-01233
Unavailable
Regular price €23.23 Price €23.23

Bluetooth antenna ANT9520-245

Internal Bluetooth antenna, ZigBee, WLAN in SMD housing. Works on the frequency: 2.45 GHz in 200 MHz, 1.5 dBi band. Dimensions of the housing are 9.5 x 2.0 x 1.0 mm .
Index: SES-01263
Index: SES-01263
Unavailable
Regular price €0.58 Price €0.58