- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Li-Pol pack Redox 4400 mAh 30C 2S 7.4 V
Universal lithium polymer battery pack by Redox with a capacity of 4400 mAh, consists of two cells. The output voltage is 7.4 V, and the constant discharge current is 30 C (132 A). The battery terminals are wires terminated with DEAN socket and 3EModel/Redox balancer output. Li-Pol batteries are often used in modeling and robotics. The Redox pack has a long and narrow shape.
Li-Pol Redox 4400 mAh 30C 2S 7.4 V battery.
The Li-Pol Redox 4400 mAh pack has a DEAN connector.Redox battery specification
- Battery type: lithium-polymer
- Connectors: DEAN socket and output for balancer type 3EModel/Redox
- DEAN cable length: 10 cm
- Maximum charging current: 1C (4.4 A)
- Voltage: 7,4 V
- Capacity: 4400 mAh
- Constant discharge current: 132 A (30C)
- Battery dimensions: 128 x 43 x 15 mm
- Weight: 193 g
We also offer chargers adapted to battery pack connectors.
How to charge Li-Pol battery packs?
When using Li-Pol pack s you should pay special attention to proper charging of cells. It is important to keep balanced cells, that is evenly charged (to the same voltage level) each of the cells in relation to the others. There are many chargers for Li-Pol packs, both simple compact and advanced microprocessor based chargers are available.
Storage is also an important issue. If the cells will not be used for a long time, it is a good idea to put them into the Storage level (microprocessor chargers have a program that will automatically put the packs into this state). This mode will charge or discharge the pack to the level of 3.7 V per cell - which is the best voltage in the context of Li-Pol pack performance, as well as its life.
CAUTION!
Before use, be sure to read the LI-POL BATTERY USE AND WARRANTY TERMS!
