- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Li-Pol pack Redox ASG 1750 mAh 20C 3S 11.1 V
The lithium-polymer battery pack from Redox consists of three cells. Its capacity is 1750 mAh. The output voltage is 11.1 V and the constant discharge current is 20 C (35 A). The outputs of the battery are 10 cm long cables terminated with a Dean socket and an output to a balancer. Most often these batteries are used in modeling and robotics. The product is distinguished by its long and narrow shape, allowing it to be placed in ASG replica models or in long glider fuselages.
Li-Pol pack Redox ASG 1750 mAh 20C 3S 11.1 V.
The Li-Pol 1750 mAh pack has a DEAN connector.
Redox battery specification
- Battery type: lithium-polymer
- Connectors: DEAN socket and balancer output
- DEAN cable length: 10 cm
- Maximum charging current: 1C (1.75 A)
- Voltage: 11,1 V
- Capacity: 1750 mAh
- Constant discharge current: 35 A (20C)
- Battery dimensions: 86 x 30 x 20 mm
- Weight: 111 g
We also offer chargers adapted to the pack connectors.
Recommendations for using Li-Pol batteries
When using Li-Pol pack s you should pay special attention to proper charging of the cells. It is important to keep balanced cells, i.e. to evenly charge (to the same voltage level) each of the cells in relation to the others. There are many chargers for Li-Pol packs. We recommend compact charg ers available in our offer or advanced microprocessor based chargers. An important issue is also the storage of packs. If the cells will not be used for a long time, it is worth putting them into the Storage level (microprocessor chargers have a program that will automatically put the packs into this state). This mode will charge or discharge the pack to the level of 3.7 V per cell - which is the best voltage in the context of Li-Pol pack performance, as well as its life.
CAUTION!
Before use, be sure to read the LI-POL BATTERY USE AND WARRANTY TERMS!
