- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Wi-fi module based on the LPB100 system which works in802.11 b/g/n standard.The communication is via theUARTinterface(RX, TX pins), it operates with a voltage of 3.3 V. It has LEDs indicating the transmission and the status of the device, and abuilt-in USB to UART converterwith the miniUSB slot.
| Detailed information is available indocumentationandthe user manual. |
Specification
- Supply voltage: 5 V
- The module is based on a WiFi-LPB100
- UART interface support:
- RX - it tolerates the voltage of 3.3 V
- TX - it operates with a voltage of 3.3 V
- Reset, Reload and WPS buttons
- Built-in PCB antenna
- Pins pitch: 2.54 mm
- MiniUSB connector
- Included is USB - miniUSB wire
- Module dimensions: 76 x 38 mm
Tips
- Holding the RESET button for 3 seconds, returns the device to factory settings
- The READY LED is working if you run the wi-fi module
- The communication operates at the 3.3 V standard of voltage so to connect the 5 V boards, for example,Arduino Uno, you must usea voltage converter
Useful links |
