- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
A module enabling communication with LoRa 868 MHz, WiFi and Bluetooth BLE networks based on Linux with support for Python programmers. It has an ESP32 chip with 512 kB RAM and 4 MB Flash. 24 GPIO lines, 2x UART, 2x SPI, I2C, I2S, microSD and 8 channels of 12-bit A/C converter allow you to connect any sensors and create an Internet of Things (IoT).
|
Detailed module description can be found onthe manufacturer's website andin thetechnical specification.The manufacturer also provides freePymakr software. |
Main features
- Operating voltage: 3.3 V to 5.5 V
- Microcontroller ESP32
- RAM: 512 kB
- Flash memory: 4 MB
- Built-in 802.11b/g/n WiFi module with a range up to 1 km
- Built-in IP v6 stack
- LoRa (Long Range) module
- Frequency:
- 868 MHz (Europe) - power up to +14 dBm
- 915 MHz (America, Australia and New Zealand) - power up to +20 dBm
- Range:
- Node mode: up to 40 km
- Nano Gateway mode: up to 22 km (capacity up to 100 nodes)
- Built-in Bluetooth BLE 4.2
- Built-in 32 kHz RTC real-time clock
- Built-in DMA controller
- GPIO lines: 24 exits
- Communication interfaces: 2x UART, 2x SPI, I2C, I2S, SD Card
- Built-in analogue-to-digital converter, 8 channels with 12-bit resolution
- Counters with four 16-bit PWM outputs
- RGB LED WS2812
- WiFi security: SSL/TLS, WPA
- u.FL connector for connecting an external antenna
- Dimensions: 55 x 20 x 3.5 mm
First start-up
To start working with the module, downloadthe Pymakr environment from the manufacturer's website, connect to LoPy and create your own program or use ready-made examples.
Extras
In our offer you will also find a dedicatedstand - Expansion Board,which facilitates the use of LoPy module.
The standhas, among others, a micro USB socket and a power supply socket. The subject of sale is the LoPy module,the standshould be purchased separately.
Useful links |
