Filament Devil Design Silk 1,75mm 1kg - Bright Orange

Index: DEV-18467 EAN: 5902280031789
Silk filament from Devil Design is a thermoplastic material in the form of fiber. It is used for 3D printing with the FFF method. Filament is pre-wound on a spool and vacuum packed with moisture absorber. Spool contains 1 kg of product in bright orange colour. Filament has 1,75 mm diameter. It can be used in all FFF printers, which are not protected from using filaments from external suppliers. Silk material is a blend of PLA and PETG, which is characterized by a very high gloss.
Filament Devil Design Silk 1,75mm 1kg - Bright Orange
€22.90
€18.62 tax excl.
Available
Shipping in 24 hours
PayPal payment
Devil Design Silk 1,75mm 1kg - colors:
Manufacturer: Devil Design

Description: Devil Design Silk 1,75 mm 1 kg - Bright Orange

Filament SilkFrom Devil Designis a thermoplastic material in a form of filament. It is used for3D printingby FFF method. Filament is pre-wound on a spool and vacuum packed with moisture absorber. Spool contains 1 kg of product inbright orangecolour. Filament has 1,75 mm diameter. It can be used in all FFF printers, which are not protected from using filaments from external suppliers. Silk material is a blend of PLA and PETG, which is characterized by a very high gloss.

Filaments

In our offer of filaments you will also find other materials and colors.

Filament Devil Design Silk 1,75mm 1kg - Bright Orange

Filament Devil Design Silk 1,75 mm 1 kg - Bright Orange.

Suggested parameters of printing with the felt

Printing temperature From 225 ° C to 245 ° C
Table temperature From 50°C to 60°C
Print cooling Optional

There may be a noticeable swelling of the material coming out of the nozzle when loading the filament or during printing with it. However, this is a completely natural effect, which results from the surface tension of polymers included in the filament material. For better results, the manufacturer recommends setting a high fan power during printing and lowering the printing speed.

Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Technical specification and physical properties of the felt

Parameter Range
Filament diameter 1,75 mm
Dimensional tolerance of the filament +/- 0.05 mm
Colour Bright orange
Material surface High gloss
Material shrinkage Very low
Printing temperature From 225°C to 245°C
Table temperature From 50°C to 60°C
Material Silk
Spool diameter 200 mm
Spool width 70 mm
Mounting hole diameter 52 mm
Moisture absorber Yes
Vacuum packaging Yes
Roundness +/- 0,02 mm
Packaging dimensions 205 x 205 x 80 mm
Net weight 1 kg

Colour orange
Mass 1000 g
Filament - material PLA Silk
Filament - diameter 1.75 mm
Filament - Szpula Standard
Package width 20.5 cm
Package height 20.5 cm
Package depth 8 cm
Package weight 1.342 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: