Product description: Filament Spectrum PP 1.75mm 0.75kg Nat
Spectrum PP filament in a natural color in the form of a fiber, wound on spools. The diameter of the material is 1.75 mm , the net weight is 0.75 kg . The product is hermetically packed with a desiccant. The mounting hole diameter is 52 mm. The product requires a heated bed to properly form prints. The material used makes it possible to create prints with relatively high tribological properties and resistance to thermal aging. The correct properties of the PP filament can be obtained by storing in a dark place with a humidity not exceeding 15%. For best results, it is recommended to dry the material before starting work.
In our offer of filaments you will also find other materials and colors.
Features of the PP filament
- Low processing shrinkage
- Strong layer lamination
- High resistance to mechanical, chemical and abrasion damage
- Deflection temperature under load (HDT B) - 80 ° C
- Vicat softening point (VST A) - 135 ° C
- A multitude of possible applications
Suggested filament printing parameters
| Printing temperature | 220 ° C to 240 ° C |
| Table temperature | 80 ° C |
| Print speed | From 30 mm / sec to 80 mm / sec |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Natural |
| Printing temperature | 220 ° C to 240 ° C |
| Table temperature | 80 ° C |
| Material density | 0.89 g / cm³ |
| Material | PP |
| Spool outer diameter | 200 mm |
| Spool width | 55 mm |
| Mounting hole diameter | 52 mm |
| Package | Cardboard with print |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Spool dimensions | 200 x 52 x 55 mm |
| Net weight | 0.75 kg |
