Product description: Pressure sensor with LCD display with Raspberry Pi Pico W - SB Components 26173
The pressure sensor board with Raspberry Pi Pico W from SB Component combines measurement precision with data display functionality. The integrated MPXV5010DP sensor from NXP provides accurate pressure readings in the range of 0 kPa to 10 kPa , with minimal measurement error even over a wide temperature range. The board has two pressure ports , of which P1 acts as the pressure side and P2 as the vacuum side. The signal from the sensor passes through the built-in ADC converter with 22-bit resolution, ensuring measurement accuracy and stability. Communication with the microcontroller takes place via the SPI interface , which allows easy integration with various projects. The unique feature of this board is the LCD display with a diagonal of 1.3 inches and a resolution of 240 x 240 pixels. Thanks to this, you can conveniently monitor pressure readings without the need to connect additional displays. The board is equipped with a 5-way joystick, buzzer and additional GPIO connectors. It is used in various areas , from medical to industrial. It is an ideal solution for systems based on microprocessors or microcontrollers, ensuring precise pressure measurement and clear data display.
Pressure sensor with LCD display from Raspberry Pi Pico W - SB Components 26173.
The sensor provides pressure readings ranging from 0 kPa to 10 kPa.
Main features of the product
- Precision Pressure Sensor: Uses NXP's MPXV5010DP sensor, providing accurate pressure measurements ranging from 0 kPa to 10 kPa.
- Square LCD Display: It has a built-in square LCD display with a diagonal of 1.3 inches and a resolution of 240 x 240 pixels.
- Buzzer: allows you to play up to 5 different melodies, providing additional signaling options.
- Five-way joystick: allows control and navigation in five directions for easy operation of the device.
- Additional GPIO Connectors: Features additional general-purpose I/O that are programmable, providing flexibility for integration with other peripherals.
- Wide operating temperature range: it can operate in a temperature range from -40°C to 125°C, making it suitable for use in a variety of environments.
What is Raspberry Pi Pico W?
Raspberry Pi Pico W is a small module based on the Raspberry Pi RP2040 microcontroller. The RP2040 microcontroller has a dual-core ARM Cortex M0+ system clocked at 133 MHz . RPi Pico W is equipped with 264 kB of SRAM and 2 MB of Flash memory. The board's pins are 26 GPIO pins that operate with a voltage of 3.3 V. The module can be programmed in C/C++ and MicroPython . Raspberry Pi Pico W is equipped with a microUSB connector through which it can be powered and programmed at the same time.
Raspberry Pi Pico W shield.
The board is equipped with a 5-way joystick, buzzer and GPIO connectors.
Specification of the pressure sensor overlay
- Pressure sensor: MPXV5010DP
- Built-in module: Raspberry Pi Pico W
- Maximum error: 5% in the range from 0°C to 85°C
- Pressure range: 0 kPa to 10 kPa
- Response time: 1 ms
- Operating temperature: from -40°C to 125°C
- Operating voltage: 3.3 V
- Button: 5-way joystick
- Display chip: ST7786
- Screen diagonal: 1.3"
- Resolution: 240 x 240 px
- Number of colors: 65k RGB
- Display communication: SPI
- Dimensions: 69 x 40 mm
Set contents
- 1x Pressure sensor with LCD display from Raspberry Pi Pico W - SB Components 26173
Useful links |
