- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
L293D motor controller allows to control two DC motors or one stepper motor using Arduino sets. The system allows to adjust direction and speed of motors with current consumption up to 600 mA and supply voltage from 4.5 V to 25 V.
Downloads .
The device has a 6-pin goldpin connector and 6 screw connectors.
| Pin | Description |
|---|---|
| VCC | Power supply voltage: 5 V. |
| GND | The weight of the system. |
| IN1/IN2 | Check the direction of rotation of the first engine. |
| IN3/IN4 | Check the direction of rotation of the other engine. |
|
Screw connections A+ / A- |
Outputs to connect the power supply to the first motor. |
|
Screw connector B+ / B- |
Outputs to connect the power supply to the second motor. |
|
EN1 |
Channel one PWM. |
|
EN2 |
Channel two PWM. |
|
Screw connector GND / VIN |
Outputs to connect external power supply for motors. |
Specification
- Module supply voltage: 5 V
- Operation of motors with voltages from 4.5 V to 25 V
- Controller: L293D(documentation)
- Number of engines supported: 2
- Maximum current per channel: 600 mA
