- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Toybrick RK3399Pro 3GB RAM + 16GB eMMC WiFi
Toybrick Minicomputer with RockChipRK3399Pro Dual-CoreCortex-A72+Quad-Core CortexA53processor.It is equipped with3 GBRAMand16 GBinternaleMMCmemory,WiFimodule, gigabit ethernet, two USB 2.0 type A, USB 3.0 type A, 3.0 type C, MiniJack, HDMI, DC power connector, DSI, CSIO, MiniPCIE, microphone, speaker and fan connector, eDPI andmicroSD andSIM card slot, PCi-E, RSR232. Supports TensorFlow andCaffe modelfordeep learning.
Toybrick RK3399Pro.
What do you need to run a Toybrick minicomputer?
- Power supply: 12 V / 2 A DC 5.5 / 2.1 mm (included)
- HDMI cable: to connect the device to a monitor
- Mouse and keyboard: to control and enter data into the device
- Internet connection: for software download
Toybrick minicomputer operating system
The minicomputer has Android and Linux pre-loaded, the system can be switched with a single button. Integrated components for creating AI applications have a user-friendly programming interface, seamless NPU docking for hardware acceleration of AI calculations. It supports Tensor Flow and Caffe models.
Toybrick RK3399Pro Minicomputer.
Communication in Toybrick
Toybrick has basic communication interfaces that can be found in PC-class office computers. The user has at his disposal, among others:
- Two USB 2.0 and one 3.0 connectors,under which you can connect e.g. a mouse, a keyboard, a WiFi card or a flash drive. If it turns out that there are too few sockets, you can increase their number usingan external USB HUB.
- Gigabit Ethernet socket, i.e. the possibility of direct connection to the LAN.
- MicroSD slot- microSD memory card slot.
- CSI connector- socket for connecting the camera.
- DSIconnector - socket for connecting the display.
- 40-pin GPIO-general purpose outputs/inputs that can be used to operate LEDs, buttons, motor controllers. Among them there are pins supporting I2C, SPI and UART interfaces.
Toybrick specification and comparison
| Basic information | ||
|---|---|---|
 |
 |
|
| Model | Raspberry Pi 4 model B | Toybrick |
| Edition | 6 - 2019 r. | 2019 r. |
| Technical specification | ||
| Core | Quad-Core ARM Cortex-A72 |
Quad-Core ARM Cortex-A54 Dual-Core ARM Cortex-A72 |
| Operating systems |
Linux Raspbian Windows 10 loT |
Android Fedora |
| Clocking | 1.5 GHz | 1.5 GHz + 1.8 GHz |
| Memory RAM |
Three versions
|
3 GB DDR4 |
| Memory | microSD card |
microSD card 16 GB eMMC memory |
| GPIO socket |
40-pin connector (2x20 pin) raster 2.54 mm |
40-pin connector (2x20 pin) raster 2.54 mm |
| Power supply |
|
12 V / 2 A DC 5.5 / 2.1 mm |
| Dimensions of the tiles | 85 x 56 x 17 mm | 145 x 106 mm |
| Interfaces | ||
| USB interface |
2x USB 2.0 - socket type A 2x USB 3.0 - socket type A |
2x USB 2.0 - socket type A 1x USB 3.0 - socket type A 1x USB 3.0 - socket type C |
| Network interface | Ethernet port 100/1000 Mbps |
10/100/1000 Mbps Ethernet port RTL8211E |
| WiFi interface |
Dual Band 2.4 GHz and 5 GHz 802.11 b/g/n/ac |
Supports 2.4 GHz 802.11a/b/g/n/ac |
| Bluetooth | Low Energy, BLE 5 |
Supports Bluetooth 4.0 |
| Camera | CSI socket | CSI socket |
| Touchscreen display | DSI socket | DSI socket |
| Video |
2 x microHDMI H.265 4K 60 fps H.264 1080p 30 fps OpenGLES 1.1, 2.0, 3.0 |
HDMI 4K/60fps HDCP1.4/2.2 |
| Communication | UART, SLEEPING, I2C, GPIO |
I2C, SPI, I2S, GPIO |
| Additional | - |
PCI-e connector Mini PCI-e x4 connector SIM card slot Mali-T860MP4 GPU Model Tensor Flow / Caffe |
Useful links |
