- EOL
|
Attention! The sale of the product has been completed. Check others in thiscategory. |
Product description: Grove - IR thermal imaging camera MLX9064 110° - I2C
An IR thermal imaging camera for temperature measurement can also display thermal images. Built-in sensor system 32 x 24 MLX90640 can read temperature values from -40°Cto 300°C withaccuracy of ± 1.5°C. The viewing angle is 110° x 75°.
Image from the thermal imaging camera.
The device communicates through the I2C interface, a module with a microcontroller equipped with over20 kB of RAMis required for proper operation. The camera operates with a voltagefrom 3 V to 3.6 V. There is aGroveconnector on the board to facilitate the connection of the modules with the base plate.
Thermal camera outputs
The camera module for communication uses an I2C interface. It requires a microcontroller with a minimum of 20 kB of RAM to work. Built-in Grove connector makes it easy to connect the module to the base board.
| Pin | Description |
|---|---|
| SCL | I2C bus clock line. |
| SDA | I2C bus data line. |
| VCC | Supply voltage from 3 V to 3.6 V. |
| GND | The weight of the system. |
Thermal imaging camera specifications
- Operating voltage: 3 V to 3.6 V
- Current consumption: approx. 18 mA
- Viewing angle (FoV): 110° x 75°
- Measuring range: -40°C to 300°C
- Accuracy ± 1.5°C
- Refresh rate: 0.5 Hz to 64 Hz
- Interface: I2C
- I2C address: 0x33
Useful links |
