- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Odyssey Blue J4105 - Intel Celeron J4105+ATSAMD21 8 GB RAM + 128 GB SSD WiFi+Bluetooth + enclosure - Seeedstudio 110991412.
Odyssey Blue J4105 minicomputer based onIntel Celeron J4105processor andATSAMD21microcontroller. It is equipped with8 GB of RAMand installed external memory in the form of128 GB SSD, as well as2.4 GHz / 5 GHz WiFicommunication andBluetooth 5.0. It has two Gigabit Ethernet connectors, three USB connectors (2x USB 2.0 and 1x USB 3.0), USB C connector for power, HDMI and SATA slot, and PCI-e. It has 40 RaspberryPicompatible GPIO portsand28 Arduino compatible GPIO ports. Additionally it has amicroSDand SIMcardslot. At the bottom of the board there isa large heatsink with a fan.Windows 10 (not activated) is installed on the device. Minicomputer has been locked in a dedicatedre_computercase.
|
Other versions are available in the offer: |
What is needed to run the Odyssey Blue J4105 minicomputer
- The power supply:
- 12 V / 2 A - 5.5 / 2.1 mm DC jack or C-type USB connector (power supply with DC plug included)
- HDMI orUSB Ccable- to connect the device to a monitor
- Mouse and keyboard- to control and enter data into the device
- Connected internet - for software download
Odyssey Blue J4105 in a re_computer housing.
Minicomputer operating system Odyssey
The minicomputer is equipped with a 128 GB SSD on which Windows 10 is installed and which has not been activated, the license must be purchased separately. Apart from Windows, Odyssey also works with Linux systems.
Communication in Odyssey X86J4105
The minicoputer is equipped with basic communication interfaces that can be found in PCs. The user has it at his disposal:
- three USB connectors (2xUSB 2.0, 1x USB 3.0), under which you can connect peripheral devices such as mouse and keyboard, as well as a USB stick to install the operating system. The number of ports can be extended using e.g. HUBUSB.
- Ethernet ports,the possibility to connect to the LAN using a cable, the maximum data transfer speed is 1000 Mbps.
- GPIO 40-pin and 28-pin-Raspberry PiandArduinocompatible connectors. They can be used to connect various sensors, diodes, motor controllers. They include such interfaces as: I2C, SPI, UART.
- microSD / SIM / SATA / PCI-e slots,allow you to place a SIM card for communication in 4G network (with optional overlay), microSD card, SSD or M.2 drive as a memory carrier.
Odyssey Blue J4105 board layout
- 28-pin terminals compatible with Arduino
- WiFi and Bluetooth chip
- 40-pin GPIO compatible with Raspberry Pi
- Audio Jack 3.5 mm connector
- USB 3.1 type C connector
- USB 3.1 type A connector
- MicroSD card slot
- SIM card slot
- M.2 SATA SSD / 4F PCIe Module
- 64 GB eMMC version
- 3x SATA III power
- SATA III data
- USB 3.1 Type A connector
- HDMI connector
- 2x Gigabit Ethernet
- DC Jack connector
- Power button
- M.2 PCIe SSD
The connector layout on the Odyssey board.
Layout of connectors on Odyssey board
- Power button
- DCIN
- 2x LAN
- HDMI
- 2x USB 2.0
- MicroSD card slot
- USB 3.0
- USB type C
- Mini Jack connector
Power supply for the Odyssey Blue mini-computer
The Odyssey Minicomputer is powered by aCorDC 5.5 / 2.1 mmUSBconnector. USB connector C supports Power Delivery, power supply voltage is 12 V / 2 A. When using the DC 5.5 / 2.1 connector for power supply, the power supply voltage should be between 12 V and 19 V, and the current capacity should be min. 2 A. A DC 5.5 / 2.1 power supply with 12 V and a capacity of 2 A is included.
Minicomputer Odyssey Blue J4105.
Specification and comparison of Odyssey X86J4105 minicomputers
| Technical Specification | ||||
|---|---|---|---|---|
 |
|
|
 |
|
| Model | Odyssey X86J4105800 - 102110399 | Odyssey X86J4105864 - 102110397 | Odyssey X86J4105864 - 102110398 | Odyssey Blue J4105 - 110991412 |
| Basic information | ||||
| Processor |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
Intel Celeron J4105
1.5 GHz to 2.5 GHz |
| Coprocessor | ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
| Graphics |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
| Memory RAM | LPDDR4 8 GB | LPDDR4 8 GB | LPDDR4 8 GB | LPDDR4 8 GB |
| Internal memory | No | eMMC 64 GB | eMMC 64 GB | SSD 128 GB |
| Operating system | Windows, Linux | Windows, Linux | Windows 10 Enterprise activated | Windows 10 installed (not activated) |
| Wireless communication | WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
| Network | Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
| Dimensions | 110 x 110 mm | 110 x 110 mm | 110 x 110 mm | 130 x 120 x 50 mm (in housing) |
| Interfaces | ||||
| Audio |
Mini jack 3.5 mm Microphone + headphones |
Mini jack 3.5 mm Microphone + headphones |
Mini jack 3.5 mm Microphone + headphones |
Mini jack 3.5 mm Microphone + headphones |
| Connections |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
| USB |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
| Video |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
| Extension slots |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
| RTC | JST 1.0 CR2032 3 V (supplied) | JST 1.0 CR2032 3 V (supplied) | JST 1.0 CR2032 3 V (supplied) | JST 1.0 CR2032 3 V (supplied) |
| TPM | Built-in TPM (2.0) | Built-in TPM (2.0) | Built-in TPM (2.0) | Built-in TPM (2.0) |
| Power supply | DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
The set includes
- Minicomputer Odyssey J4105
- WiFi + Bluetooth antenna and 5 GHz WiFi antenna
- 5.5 / 2.1 mm DC power supply
- RTC battery
- Re-computer housing
- 128 GB SSD and fan heatsink mounted
- Operating instructions
Useful links |
