- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Odyssey Blue - Intel Celeron J4125 + ATSAMD21 8GB RAM + 128GB SSD - WiFi - Windows 10 Mini PC - Seeedstudio 110991564
The Odyssey Blue minicomputer is equipped with a quad-core Intel Celeron J4125 processor clocked from 2.0 GHz to 2.7 GHz with the Intel UHD 600 graphics chip, and the ATSAMD21 ARM Cortex M0 + coprocessor . It has an external SSD drive with a capacity of 128 GB, supports WiFi dual band 2.4 GHz and 5 GHz wireless communication. Odyssey Blue comes pre-installed with Windows 10 (not activated), supports Linux operating system. The board is equipped with two gigabit Ethernet connectors, three USB ports (2x USB 2.0 and 1x USB 3.1), audio inputs / outputs, USB type C connector for power supply, HDMI 2.0 connector and SATA slot, as well as two M.2 PCI- e. In addition, it has a slot for microSD and SIM cards. The set with the board also includes a blue re_computer case.
Windows 10 has been installed on Odyssey Blue, but a license key must be purchased separately.
Special features of the module
- Equipped with Intel Celeron J4125 quad-core processor clocked from 2.0 GHz to 2.7 GHz
- Supports WiFi wireless communication in the 2.4 GHz and 5 GHz bands
- It has Intel UHD Graphics 600
- Equipped with Dual Gigabit Ethernet , with which you can easily build an OpenWrt and pfSense project
- With Odyssey Blue, you can build your own NAS (Network-Attached Storage), high-performance virtual router or 4G LTE gateway for IoT applications, as well as NVR
- It has an integrated Arduino ATSAMD21 ARM Cortex M0+ coprocessor
- It supports Intel Hyper V virtualization and can be virtualized with Promox or VMware ESXi
- The board is equipped with GPIO 40-pin connectors compatible with Raspberry Pi
- Equipped with 2x M.2 PCIe connectors (Key B and Key M)
- Supports Windows 10 and Linux operating system - comes with Windows 10 pre-installed (not activated)
- It is compatible with the Grove series ecosystem and also works perfectly with the Home Assistant
- The set also includes a metal housing re_computer
Communication in Odyssey Blue
Odyssey Blue has been equipped with basic communication interfaces that can be found in typical PCs. The user has at his disposal:
- three USB type A connectors (2x USB 2.0, 1x USB 3.1) to which you can connect peripheral devices, such as a mouse and keyboard, as well as a USB drive to install the operating system. The number of ports can be extended using, for example, a USB HUB .
- two Gigabit Ethernet ports , which they give the ability to connect to the LAN network using a cable.
- GPIO 40-pin and 28-pin - connectors compatible with Raspberry Pi and Arduino . They can be used to connect various sensors, diodes, motor controllers. They include popular interfaces, such as: I2C, SPI, UART.
- microSD / SIM / SATA III / M.2 PCI-e slots
Pin description
- Power button
- DC input
- Ethernet connector 1
- Ethernet connector 2
- HDMI connector
- USB 2.0 ports
- Audio Jack
- USB 3.1 Type-C port
- USB 3.1 port
- microSD memory card slot
Kit contents
- Odyssey Blue X86J4125
- User manual
- Power Supply
- Antenna x2 (built-in)
- RTC battery (built-in)
- heatsink (built-in)
- Cooling fan (built-in)
- re_computer case
- 128GB external SSD (built-in)