- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Grove UART WizFi360 - WiFi wireless communication module - Seeedstudio 101991033
WiFi wireless communication module equipped with the WizFi360 chip. It supports the wireless band from 2.4 GHz to 2.5 GHz and is compatible with 802.11 b/g/n standards. It supports the TCP/IP protocol, a also SoftAP, Statnion and SoftAP+Station modes. It enables the microcontroller to interact with WiFi networks, thanks to which it is used in broadly understood home automation.
Special features of the module
- Compatible with multiple modes: support SoftAP / Station / SoftAP+Station mode and TCP Server / TCP Client / UDP operating mode
- Efficient network matching: support 20MHz/40MHz auto-bandwidth, bi-directional UART - WiFi transmission function
- Secure communication guaranteed: support WPA_PSK / WPA2_PSK encryption, which ensures the privacy and security of data communication on the network
- Real-time network status monitoring: keep-alive and 'ping' commands allow you to monitor the TCP connection and show the current network status
- Easy to use: The plug-and-play Grove connector makes it quick and easy to add wireless functionality to your projects
- Baud rate: UART serial port baud rate increased from 600 bps to 2 Mbps with 16 common values
Pin description
- White wire - TX - transmitter pin
- Yellow wire - RX - receiver pin
- Red wire - VIN - power pin
- Black wire - GND - system ground
Suggested use
- home automation
- Sensor networks
- Wearable electronics
- Baby monitor
- network camera
- Industrial wireless control
- WiFi beacons
- Smart Power Plug
- Location-aware apps
An example of connecting the module with Arduino Mega - not included, to be purchased separately.
Module technical specification
- Wireless communication type: WiFi
- Built-in chip: WizFi360
- Band: 2.4GHz to 2.5GHz
- Supported standard: 802.11 b/g/n
- Data transmission speed: 11Mbps, 54Mbps
- Serial port baud rate: 600 bps to 2 Mbps with 16 common values
- Interface type: serial
- Output sensitivity: 19dBm
- Supply voltage: 3 V to 3.6 V
- Antenna connector type: PCB
- Operating temperature range: -40°C to 85°C
Kit contents
- Grove UART WizFi360 - WiFi wireless communication module - 1 piece
- Cable with Grove connector
Useful links |