- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
A set of elements for self-assembly. Allows you to create a mobile robot based on theRaspberry Piminicomputer with a motor controller. Mounting the elements facilitates the online course. The set includes wooden plywood elements and metal clamps.
The contents of the PiBotta chassis kit.
Online courseOn theuczymy.edu.plwebsite you can find a course in which the author explains in detail how to combine elements in order to create a complete mobile robot. |
In our offer you will also find theRaspberry Piminicomputer used in the courseanda dedicated PiMotor driver.
The author of the course also uses additional elements, which can be purchased separately:
- Central Unit:
- Raspberry Pi - any version e.g. B+
- The engine controller:
- PiMotor motor controller-a system based on the popular L293 driver. The advantage of the module is the mounted female sockets, which allow direct connection to GPIO connectors of the Raspberry Pi mini computer.
- Remote control
- USB WiFi card for remote control
- Power supply
- Lipol package e.g. Redox 1300 mAh 7.4 V
- Switch
- DEAN plug-in for the package
- Cables with a length of 30 cm and current capacity of approx. 1 A
- Heat shrink tubing
- Drive
- DC motor
- Capacitors 100 nF
- Sensors
- HC-SR04 - ultrasonic distance sensor
- 3.3 V - 5 V converter
- 20 cm 4-core tape and plugs
- Plugs goldpin 1 piece x4, 1 x2, 2 pcs. x1
- Pins for goldpin plugs
- Platform
- Distance post 20 mm /fi 3/ in-vehicle / metal
- Distance post 35 mm /fi 3/zew in / metal
- Screws fi 3 mm/10 mm metal
- Distance post 10 mm plastic;
- Screws fi 2.5 mm with washers
- Nuts fi 2.5 mm
- Polol support ball 3/8
- Clips
- Wide Velcro 20 cm
Useful links |
