• EOL

Touchpad TTP229 - 8 buttons + line sensor - Waveshare 10225

Index: WSR-04516 EAN: 5904422371432

Touch keyboard, equipped with 8 buttons and the linear sensor with the goldpin connector - pitch of the 2.54 mm. It communicates via an I2C bus or digital outputs for each button separately, its external dimensions: 68 x 47 mm.

 

Touchpad TTP229 - 8 buttons + line sensor - Waveshare 10225
€8.50
€6.91 tax excl.
Manufacturer: Waveshare
Compatibility: Arduino

Attention!

The product has been discontinued. Check other products in category.

Description

Touch keyboard, equipped with 8 buttons and the linear sensor with the goldpin connector - pitch of the 2.54 mm. It communicates via an I2C bus or digital outputs for each button separately, its external dimensions: 68 x 47 mm.

The distribution of elements on the keyboard.

Key features

  • It has 8 touch keys and 1 linear sensor.
  • The ability to work in a mode of 16 buttons - touch sensor provides additional 8 individual keys.
  • It communicates via the I2C bus, using only two lines: SDA and SCL, or in digital form - for each of the 8 buttons, a separate output OUTx.
  • The setting of the operation modes using jumpers.
  • It works with the voltage from 2.4 to 5.5 V.
  • It has an automatic re-calibration which activates itself when the keys are not touched for longer than 4 seconds.
  • Two holes with a diameter of 3 mm ensure fixing of the keyboard.

Connection

The system communicates via the I2C bus or digital outputs for each button separately. It can operate in the mode of 8 buttons or 16 buttons. The setting of the operation modes using the jumpers.

 

Pin Description
VCC Supply voltage from 2.4 V to 5.5 V.
GND The ground of the system.
SDA The data line of the I2C bus.
SCL Cock line of the I2C bus.

OUTx

The digital outputs of the individual buttons

KEY0 = OUT0, etc.

 

Once launched, the keyboard needs about 0.5 sec to stabilize, at this time do not touch the buttons. The device can operate in two modes:

  • 16 keys, exit via the I2C bus - all jumpers are connected,
  • 8 keys with digital outputs OUTx - connected are two jumpers: SLWPTM and WPSCT, others are disconnected.

Specification

  • Supply voltage: from 2.4 V to 5.5 V
  • Number of keys: 8 + linear sensor plays the role of additional 8 buttons
  • Communication: digital outputs or I2C bus
  • Refresh speed: 8 Hz / 64 Hz
  • Operating temperature: 40 °C to 85 °C
  • Storage temperature: from 50 °C to 125 °C
  • Three mounting holes with a diameter of 3 mm
  • External dimensions: 68 x 47 mm

 

Switch - type2 monostable
Switch - type keyboard
Switch - shape rectangular
Switch - backlight no
Colour blue
Length 68 mm
Width 47 mm
Raster 2.54 mm
Test 4
Package width 8 cm
Package height 1.5 cm
Package depth 11.5 cm
Package weight 0.018 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: