- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Powering module for c-uGSM and d-u3G systems which also provides conversion of logical signals in a configuration powered with the battery, e.g. LiPol. It accepts the supply voltage from 6 V to 16 V. The output voltage is 5 V with the current of 600 mA(temporary of up to 2 A). Board sizes are 35 x 21 mm. It can also be used as a power source forRaspberry Piand Arduino.
Pins
The pins were divided to the part connected to the main microcontroller and to the part connected to the GSM module.
|
Pin of the part connected with the microcontroller |
Description |
|---|---|
| SLP | Sleap input activated by the high status - details in the documentation of the GSM module. |
| CTS | Input Clear to Send - details in the documentation of the GSM module. |
| RTS | Output Ready to Send - details in the documentation of the GSM module. |
| STATUS | The status in. |
| RI | The output Ring Indicator - details in documentation. |
| GROUND | The groundof the system. |
| Vmain | Alternative power supply input from 6 V to 16 V. |
| Vout | Additional adjustable output of 5 V. |
| DIS | The input disabling the regulator, is activated by the high status. |
| ON/OFF | The control of the supply voltage of the microcontoller's part (On/Off). |
| RESET | Reset of the microcontoller's part. |
| TX | Communication via the serial interface. |
| RX | Communication via the serial interface. |
|
Pin of the part connected with the GSM module |
Description |
|---|---|
| SLP | Sleap input activated by the high status - details in the documentation of the GSM module. |
| CTS | Input Clear to Send - details in the documentation of the GSM module. |
| RTS | Output Ready to Send - details in the documentation of the GSM module. |
| STATUS | The status pin. |
| RI | The output Ring Indicator - details in the documentation of the GSM module. |
| GROUND | The ground of the system. |
| Vcc | Adjustable output of 4 V to power the modules of c-uGSM or d-u3G. |
| Vin | Not connected |
| Vusb | Input of 5 V from the USB interface of the module c-uGSM or d-u3G. |
| ON/OFF | Control of the supply voltage of GSM part (On/Off). |
| RESET | Reset of GSM part. |
| TX | Communication via the serial interface. |
| RX | Communication via the serial interface. |
Useful links |
