- EOL
|
Attention! The sale of the product has been completed. Check others in thiscategory. |
Description
A pcDuino4 nano minicomputer with a high-performanceAllWinner H3 ARM Cortex A7 dual-core 32-bit 1.2 GHzprocessor. The board has1 GB of DDR3 SDRAM,built-inEthernet Gigabitport,HDMI1.4 1080p/30Hzport, AVOUT3.5 mm,microphone,IR receiver and3 xUSB 2.0,microSD connector.Works with Ubuntu or Debian systems. The device has40 x GPIO compatible with Raspberry Pi.
The device has 3 USB 2.0 ports, HDMI, Ethernet port and many more.
What do I need to run a pcDuino4 nano minicomputer?
- MicroSD memory card- the media on which theoperatingsystem will be installed
- The power supply:
- 5 V / 2 Afor the minicomputer itself
- 5 V / 3 A - for a minicomputer with attached overlays
- HDMI cable - toconnect the device to a monitor
- Mouse and keyboard- to control and enter data into the device
- Connected internet - for software download
Operating system
pcDuino4 nano works with Ubuntu or Debian systems. The device can be a microSD card.
|
Installation of the system is very easy -check the manual! |
Communication
pcDuino4 nano has basic communication interfaces that can be found in PC-class office computers. The user has it at his disposal:
- 3 x USB 2.0,under which you can connect e.g. a mouse, keyboard, WiFi card or a flash drive. If it turns out that there are too few sockets, you can increase their number usingan external USB HUB.
- 1 x microUSB OTG- to connect OTG devices
- Ethernet socket, i.e. possibility of direct connection to the LAN.
- microSD slot- a slot for a microSD memory card, on which the operating system can be installed.
- DVP camera connector- to connect the camera
- AVOUT connector- composite and stereo audio connector
- microphone- records sound
- IR receiver- infrared controllable
- 40 GPIO pins -compatible with Raspberry Pi
pcDuino4 nano has a slot fora microSD memory card.
The card is not in the set, it can be purchased separately.
Power supply
The system uses the microUSB connector as the power source. The manufacturer recommends that the voltage given on the connector should be 5.0 V, while the current capacity of the power supply used should be at least 2.0 A. In our offer you will finddedicated power supplies.
pcDuino4 nano has anHDMI connectorthrough which you can transmit both video and audio in 1080p quality.
Specification and comparison
| Basic information | ||
 |
 |
|
| Model | Raspberry Pi 3 model B | pcDuino4 nano |
| Edition | 3 - 2016 r. | 2015 r. |
| Technical specification | ||
| Core | Quad-Core ARM Cortex A53 |
Dual-Core ARM Cortex-A7 Mali 400 MP2 @ 600 MHz |
| Operating systems |
Linux Raspbian Windows 10 loT |
Ubuntu Debian |
| Clocking | 1.2 GHz | 1.2 GHz |
| Memory RAM | 1 GB LPDDR2 @ 900 MHz | 1 GB DDR3 SDRAM |
| Memory | microSD card |
microSD card |
| GPIO socket |
40-pin connector (2x20 pin) raster 2.54 mm |
40-pin connector (2x20 pin) raster 2.54 mm |
| Power supply |
5.1 V / 2.5 A via microUSB |
5.0 V / 2 A via microUSB |
| Dimensions of the tiles | 85 x 56 x 17 mm | 64 x 56 x 18 mm |
| Interfaces | ||
| USB interface | 4x USB 2.0 - socket type A |
3 x USB 2.0 - socket type A |
| Network interface | 10/100 Mbps Ethernet port | 1 Gbps Ethernet port |
| WiFi interface | 802.11 b/g/n 150 Mbps | No |
| Bluetooth | Low Energy, BLE 4.1 | none |
| Camera | CSI socket | DVP interface |
| Touchscreen display | DSI socket | No |
| Video | HDMI HD 1080px / 30 fps | HDMI HD 1080px / 30 fps |
| Communication | UART, SLEEPING, I2C, GPIO |
AVOUT, UART, SPI, I2C, GPIO |
Useful links |
