- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
GSM and GPRS A6 module enable communication in GSM and GPRS standard. Allows voice chat, sending SMS messages. On board are: connector for SIM-card (card of standard type), Gravity connector, outputs/inputs for audio, and antenna. It supports GSM / GPRS: 850 / 900 / 1800 / 1900 MHz and the AT commands. The module is supplied with the voltage of 5 V. The UART port supports a voltage from 2.8 V, thanks to it, it is compatible withArduinoandRaspberry Pi.
Leads
The module is compatible withArduinoandRaspberry Pi, it has a Gravity connector to communicate using UART interface. To connect the module through the UART interface, you need to use a USB-UART converter.
| PIN | Description |
|---|---|
| TX | The line of the communication ofUART interface (2,8 V). |
| RX | The line of the communication of UART interface. |
| GND | The ground of the system. |
| VCC | The supply voltage - 5 V |
|
Examples of projects for Arduino:
|
Specification
- Working voltage: 5 V
- Current: < 3 mA
- Interface: UART (TTL)
- Band GSM / GPRS: 850 / 900 / 1800 / 1900 MHz
- Frequency: 105 dBm
- GPRS class: 10
- Built-in antenna
- Slot for SIM card - for using micro SIM or nano SIM cards, you must use an adapter
- Supports:
- VoLTE
- SMS
- data transfer: download - 85.6 Kbps, upload - 42,8 Kbps
- the AT commands
- digital and analog audio: HR, FR, EFR, AMR and voice
- Operating temperature: -30℃ to 80℃
- Dimensions: 45 x 37 mm
- Weight: 34 g
Included
- Cable Gravity 4-pin x 1
- Strip 4-pin pitch 2.54 x 1
Useful links |
