- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: OBD II Diagnostic Module - Car Diagnostics Kit - SparkFun RTL-10769
The module enables access to OBD-II car diagnostics system, installed in cars produced after 2001 in European Union, and after 2002 in Poland. The system allows, among others, to read trouble codes (DTC - diagnostic trouble codes) stored in the memory, concerning the engine, electronic devices, etc. The system allows the use of the ELM327 command set through a serial interface.
The connection between the board and the car is done via DB9 - DLC 9 cable (included in the set). DLC is standard diagnostic connector used in OBD II systems. The standard defines also the way of communication with the on-board computer so called ECU (Electronic Control Unit). More information can be found in the manual.
The output of the module is the UART serial interface that enables connection with a computer via USB to UART adapter. On the board there is STN1110 chip that converts data from OBD II system to UART (RS-322) serial interface frames. It allows serial transmission of a standard set of ELM327 commands from a PC or a development kit (e.g. Arduino) to the central unit of the car.
Video
A video made by SparkFun showing the product capabilities.
The specification of the OBD II Diagnostic Module
- Compatible with the ELM327 AT command set
- Compatible with the Extended ST command set
- Communication: UART (speeds from 38 bps to 10 Mbps)
- Secure bootloader, easy software update
- Support for all OBD II protocols:
- ISO 15765-4 (CAN)
- ISO 14230-4 (Keyword Protocol 2000)
- ISO 9141-2 (Asian, European, Chrysler vehicles)
- SAE J1850 VPW (GM vehicles)
- SAE J1850 PWM (Ford vehicles)
- Support for OBD protocols:
- ISO 15765
- ISO 11898 (raw CAN)
- Support for SAE J1939 OBD protocol
- Automatic detection of the used protocol
- Large memory buffer
- Voltage input for battery monitoring
Useful links |
