Over 15 years

professional experience

Easy returns

up to 30 days

Over 1 000 000

shipped orders

Fast shipping

all across the EU

Next shipment on Monday

Wishlist

Arduino Nano RP2040 Connect - ABX00052

Index: ARD-19487 EAN: 7630049203051

Ask a question

Remove from wishlist Add to wishlist

Arduino® Nano RP2040 is the next board in the Arduino® Nano series and the first board created in collaboration with Raspberry Pi. The module is based on the Raspberry Pi RP2040 microcontroller, this is the first module to combine the RP2040 chip along with additional sensors and wireless connectivity on a PCB. The board is equipped with the RP2040 chip, 6-axis IMU sensors, U-Blox Nina chip for WiFi and Bluetooth wireless communication, as well as a microphone and RGB LED. This version does not have goldpin connectors soldered in.

€31.00

€25.20 tax excl.

Check quantity

Manufacturer: Arduino

Must-have accessories

MicroUSB B - A 2.0 cable Lanberg black - 1,8 m

€1.50

Nano Screw Terminal Adapter - screw connectors - hat for Arduino Nano -...

€13.50

Product description: Arduino Nano RP2040 Connect - ABX00052

The Arduino Nano RP2040 is another board in theArduino Nanoseries and the first board created in collaboration with the Raspberry Pi. The module is based onRaspberry Pi RP2040microcontroller. This is the first module which combines RP2040 chip with additional sensors and wireless communication on PCB. The board is equipped with the RP2040 chip,6-axis IMU sensors,U-Blox Ninachip forWiFiandBluetoothwireless communication, as well as a microphone and RGB LED. This version does not have goldpin connectors soldered in. The IMU chip hasmachine learningcapability, so additional detection algorithms are available. The input / output pins of the Arduino Nano RP2040 Connect operate at 3.3V.

Arduino Nano RP2040 without goldpin connectors.

Rozkład elementów na płytce Arduino Nano RP2040

Component layout on the Arduino Nano RP2040 board.

How to program Arduino Nano RP2040

The Arduino Nano RP2040 Connect module can be programmed inArduino IDEoffline mode or inArduino IDE Cloudonline mode. Offline programming is done by connecting the board to computer using microUSB connector, while to program the board online, connect to wireless network and use Arduino Cloud. The module is equipped with RP2040 chip with SPI, I2C, I2S, PIO, UART, PWM interfaces and digital and analog pins. There is also U-Blox chip on the board allowing wireless communication via WiFi and Bluetooth.

Main features of the Arduino Nano RP2040

Interfaces: USB, SPI, I2C, I2S, UART, PWM
U-Blox Nina chip for WiFi / Bluetooth wireless communication
MicroUSB connector for computer connection and 5V power supply
Built-in microphone, RGB LED and 6-axis IMU
Based on Raspberry Pi RP2040 microcontroller clocked at 133 MHz
Built-in 16MB Flash memory and 264kB SRAM
20 PWM pins, 8 analog pins and 22 digital pins
Standard dimensions for Nano series - 45 x 18 mm

Arduino Nano with Raspberry Pi RP2040 microcontroller.

Arduino Nano RP2040 Connect specifications
Power supply voltage	4.5 V to 21 V
Operating voltage of logic part	3,3 V
Output current 3.3 V	800 mA
RP2040 microcontroller	ARM Cortex M0 Dual-Core 133 MHz 264 kB SRAM 2 MB Flash DMA controller supports up to 16 MB Flash memory via QSPI bus programmable IO (PIO) to support external peripherals 4-channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion SWD debugging
WiFi / Bluetooth module U-blox Nina W102	dual core Xtensa LX6 240 MHz 32-bit 520 kB SARAM on-chip memory 448 kB ROM for boot and core functions 16 MB Flash memory for code storage, includes hardware encryption for program and data protection 1 kB EFUSE for MAC address, module configuration, Flash encryption and Chip-ID IEEE 802.11 b/g/n 2.4 GHz WiFi Bluetooth 4.2 built-in antenna (PIFA) 4 x 12-bit ADC 3 x I2C, SDIO, CAN, QSPI
Memory	AT25SF128A 16MB NOR Flash 532 Mb/s QSPI data transfer 100k programming / erase cycles
Sensor IMU 6-axis ST LSM6DSOXTR	3D gyroscope: ± 2 / ± 4 / ± 8 / ± 16 g full scale 3D accelerometer: ± 125 / ± 250 / ± 500 / ± 1000 / ± 2000 dps full scale advanced pedometer, step detector and step counter Motion detection and roll detection standard interrupts: free fall, 6D/4D orientation wake-up, click, double click programmable finite state machine: accelerometer, gyroscope and external sensors machine learning core embedded temperature sensor
MEMS ST microphone MP34DT06JTR	AOP = 122.5 dBSPL signal to noise ratio 64 dB omnidirectional sensitivity frequency -26 dBFS ± 1 dB
RGB LED	common anode connected to U-blox Nina W102 GPIO
Microchip ATECC608A cryptographic chip	cryptographic coprocessor with secure hardware key storage I2C, SWI Hardware support for symmetric algorithms: SHA-256 and HMAC HASH including off-chip context saving/restoration AES-128: encryption/decryption, Galois Field Multiply da GCM internal high quality random number generator NIST SP 800-90A/B/C Secure boot support full ECDSA code signature validation, optional hash/signature Optional communication key disablement prior to secure boot Message encryption/authentication to prevent attacks
I/O	14 x digital pin 8 x analog pin microUSB UART, SPI, I2C, I2S, PIO
Slot	microUSB
Operating temperature	from -20°C to 80°C
Dimensions	45 x 18 mm

Voltage to	4.5 V
Voltage from	21.0 V
UC - Microcontroller	RP2040
UC - Core	Cortex-M0
UC - Flash	16 MB
UC - core	2. Dual Core
UC - analog in	8
UC - freq	133 MHz
UC - PWM	20
UC - WiFi	yes
UC - Bluetooth	yes
UC - I2C	yes
UC - UART	yes
UC - SPI interface	yes
Package width	6 cm
Package height	2.5 cm
Package depth	8 cm
Package weight	0.017 kg

Send us your question

Be the first to ask a question about this product!

Product reviews

5/5

Average grade

1

Customers opinion

The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Wito 04.01.2023 Confirmed purchase Translated review

Module from the Arduino stable - well thought out, beautifully packaged and well documented. Functionally, there is no LiPo system, I2C socket, e.g. Grove and USB-C. Few overlays adapted to the Nano format. The speed of the RP2040 is enough to handle 240x320 LCD and trigonometric operations. Arduino cloud included. Perfect for testing and learning.