Arduino Nano RP2040 Connect - ABX00052

Index: ARD-19487 EAN: 7630049203051
Arduino® Nano RP2040 is the next board in the Arduino® Nano series and the first board created in collaboration with Raspberry Pi. The module is based on the Raspberry Pi RP2040 microcontroller, this is the first module to combine the RP2040 chip along with additional sensors and wireless connectivity on a PCB. The board is equipped with the RP2040 chip, 6-axis IMU sensors, U-Blox Nina chip for WiFi and Bluetooth wireless communication, as well as a microphone and RGB LED. This version does not have goldpin connectors soldered in.
Arduino Nano RP2040 Connect - ABX00052
€33.90
€27.56 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Arduino

Product description: Arduino Nano RP2040 Connect - ABX00052

The Arduino Nano RP2040 is another board in theArduino Nanoseries and the first board created in collaboration with the Raspberry Pi. The module is based onRaspberry Pi RP2040microcontroller. This is the first module which combines RP2040 chip with additional sensors and wireless communication on PCB. The board is equipped with the RP2040 chip,6-axis IMU sensors,U-Blox Ninachip forWiFiandBluetoothwireless communication, as well as a microphone and RGB LED. This version does not have goldpin connectors soldered in. The IMU chip hasmachine learningcapability, so additional detection algorithms are available. The input / output pins of the Arduino Nano RP2040 Connect operate at 3.3V.

Arduino Nano RP2040Arduino Nano RP2040 without goldpin connectors.
Rozkład elementów na płytce Arduino Nano RP2040Component layout on the Arduino Nano RP2040 board.

How to program Arduino Nano RP2040

The Arduino Nano RP2040 Connect module can be programmed inArduino IDEoffline mode or inArduino IDE Cloudonline mode. Offline programming is done by connecting the board to computer using microUSB connector, while to program the board online, connect to wireless network and use Arduino Cloud. The module is equipped with RP2040 chip with SPI, I2C, I2S, PIO, UART, PWM interfaces and digital and analog pins. There is also U-Blox chip on the board allowing wireless communication via WiFi and Bluetooth.

Main features of the Arduino Nano RP2040

  • Interfaces: USB, SPI, I2C, I2S, UART, PWM
  • U-Blox Nina chip for WiFi / Bluetooth wireless communication
  • MicroUSB connector for computer connection and 5V power supply
  • Built-in microphone, RGB LED and 6-axis IMU
  • Based on Raspberry Pi RP2040 microcontroller clocked at 133 MHz
  • Built-in 16MB Flash memory and 264kB SRAM
  • 20 PWM pins, 8 analog pins and 22 digital pins
  • Standard dimensions for Nano series - 45 x 18 mm
Arduino Nano RP2040

Arduino Nano with Raspberry Pi RP2040 microcontroller.

Arduino Nano RP2040 Connect specifications
Power supply voltage 4.5 V to 21 V
Operating voltage of logic part 3,3 V
Output current 3.3 V 800 mA
RP2040 microcontroller
  • ARM Cortex M0 Dual-Core 133 MHz
  • 264 kB SRAM
  • 2 MB Flash
  • DMA controller
  • supports up to 16 MB Flash memory via QSPI bus
  • programmable IO (PIO) to support external peripherals
  • 4-channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion
  • SWD debugging
WiFi / Bluetooth module U-blox Nina W102
  • dual core Xtensa LX6 240 MHz 32-bit
  • 520 kB SARAM on-chip memory
  • 448 kB ROM for boot and core functions
  • 16 MB Flash memory for code storage, includes hardware encryption for program and data protection
  • 1 kB EFUSE for MAC address, module configuration, Flash encryption and Chip-ID
  • IEEE 802.11 b/g/n 2.4 GHz WiFi
  • Bluetooth 4.2
  • built-in antenna (PIFA)
  • 4 x 12-bit ADC
  • 3 x I2C, SDIO, CAN, QSPI
Memory
  • AT25SF128A 16MB NOR Flash
  • 532 Mb/s QSPI data transfer
  • 100k programming / erase cycles
Sensor IMU 6-axis ST LSM6DSOXTR
  • 3D gyroscope:
    • ± 2 / ± 4 / ± 8 / ± 16 g full scale
  • 3D accelerometer:
    • ± 125 / ± 250 / ± 500 / ± 1000 / ± 2000 dps full scale
  • advanced pedometer, step detector and step counter
  • Motion detection and roll detection
  • standard interrupts: free fall, 6D/4D orientation wake-up, click, double click
  • programmable finite state machine: accelerometer, gyroscope and external sensors
  • machine learning core
  • embedded temperature sensor
MEMS ST microphone MP34DT06JTR
  • AOP = 122.5 dBSPL
  • signal to noise ratio 64 dB
  • omnidirectional sensitivity
  • frequency -26 dBFS ± 1 dB
RGB LED
  • common anode
  • connected to U-blox Nina W102 GPIO
Microchip ATECC608A cryptographic chip
  • cryptographic coprocessor with secure hardware key storage
  • I2C, SWI
  • Hardware support for symmetric algorithms:
    • SHA-256 and HMAC HASH including off-chip context saving/restoration
    • AES-128: encryption/decryption, Galois Field Multiply da GCM
    • internal high quality random number generator NIST SP 800-90A/B/C
  • Secure boot support
    • full ECDSA code signature validation, optional hash/signature
    • Optional communication key disablement prior to secure boot
    • Message encryption/authentication to prevent attacks
I/O
  • 14 x digital pin
  • 8 x analog pin
  • microUSB
  • UART, SPI, I2C, I2S, PIO
Slot microUSB
Operating temperature from -20°C to 80°C
Dimensions 45 x 18 mm
Voltage to 4.5 V
Voltage from 21.0 V
UC - Microcontroller RP2040
UC - Core Cortex-M0
UC - Flash 16 MB
UC - core 2. Dual Core
UC - analog in 8
UC - freq 133 MHz
UC - PWM 20
UC - WiFi yes
UC - Bluetooth yes
UC - I2C yes
UC - UART yes
UC - SPI interface yes
Package width 6 cm
Package height 2.5 cm
Package depth 8 cm
Package weight 0.017 kg

Be the first to ask a question about this product!

Product reviews

Arduino Nano RP2040 Connect - ABX00052

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: