Ardumoto Drive Shield L298 - Shield for Arduino + motors and wheels - SparkFun KIT-14180

Index: SPF-12777 EAN: 845156007868

A set of components to build a robot based on Arduino board. The kit includes: two motors with the wheels, the driver based on L298 as a shield for the Arduino and the necessary wires and connectors.

Ardumoto Drive Shield L298 - Shield for Arduino + motors and wheels - SparkFun KIT-14180
€45.35
€36.87 tax excl.
In stock, shipping 24 hours!
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: SparkFun
Compatibility: Arduino

Description

A set of components to build a robot based onArduino board. The kit includes: two DC motor with the wheels, the driver based onthe L298 systemin the form of shield and the necessary wires and connectors.

 

Set based on the earlier version

Connection

Ardumoto shield is easy to use dual-channel driver for DC motors. It works based on the popularbridge H L298. The device can control two motors with a current consumption of up to 2 A, it is powered by VIN from Arduino board. It uses pin 2 to select the direction and 3 to generate the PWM signal for channel A and, respectively, pins 4 and 11 for channel B.

 

Ardumoto Shield dla Arduino - SparkFun

 

Pin

Arduino

Alternative Pin Pin Ardumotor Description
3 9 PWM A

PWM signal to control the speed of rotation of the motor connected to channel A.

Filling: 0 - motor is stopped, 255 - maximum speed.

11 10 PWM B

PWM signal to control the speed of rotation of the motor connected to channel B.

Filling: 0 - motor is stopped, 255 - maximum speed.
2 8 DIR A

The digital signal 0/1 for selecting the direction of rotation of the motor

attached to channel A.

3 9 DIR B

The digital signal 0/1 for selecting the direction of rotation of the motor

attached to the channel B.

 

The details in the manufacturer's user manual!

 

Included:

  • 1 x SparkFun Ardumoto Shield - shield for Arduino
  • 2 x DC Motors with the following parameters:
    • Nominal voltage: 4.5 V
    • Average current consumption: 190 mA
    • Maximum current consumption: 250 mA
    • Rotation speed: 200 rpm
    • Torque: 0.8 kg*cm
  • 2 x wheels with tyres with a diameter of 65 mm
  • 1 x set of connectors for Arduino
  • 3 x screw connectors of ARK type - two-pin, 3.5 mm
  • 1 x adapter for battery 9 V

 

Diameter 65.0 mm
Voltage to 4.0 V
Voltage from 5.0 V
Motor - current 250 mA
Rotation speed 200 obr/min
Torque 0,8 kg*cm
Voltage nominal 4.5 V

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Solar Charger Shield v2.2 - shield for Arduino

Module for connecting a mobile power source for Arduino. It allows you to power the microcontroller from any battery voltage from 3 V to 4.2 V or solar panel voltage from 4.8 V...
Index: SEE-04429
Index: SEE-04429
Delivery scheduled for 2022-08-05
Regular price €14.97 Price €14.97

Wooden jigsaw for learning programming for Ozobot

The jigsaw shows how the world of robots works by creating a variety of routes and loops that Ozobot can follow. Learning through playing ensures that the students are actively...
Index: OZB-12828
Index: OZB-12828
Delivery scheduled for 2022-06-29
Regular price €43.40 Price €43.40

Robot Arm Braccio TinkerKit + Arduino Shield driver

Arm of the robot for self-assembly, equipped with 6 servos. There is also a special controller Braccio in the form of cap over the Arduino and the necessary mounting elements....
Index: ROB-06362
Index: ROB-06362
In stock, shipping 24 hours!
Check quantity
Regular price €237.62 Price €237.62

Set of 13 modules with cables for Arduino - Waveshare 9467

Set of 13 popular modules compatible with Arduino plates. In the set are i.a.: sensors of flames, color, soil moisture, rotation, sound, liquid level and many others. The...
Index: WSR-04511
Index: WSR-04511
In stock, shipping 24 hours!
Check quantity
Regular price €46.66 Price €46.66

Servo Motor Shield v2.3 - 2-channel motor driver, stepper motors and servos - Adafruit 1438

Cap for Arduino to control four DC motors (13.5 V/1.2 A), two stepper motors and two servos. It communicates through interface I2, using only two lines of Arduino.
Index: ADA-02444
Index: ADA-02444
Waiting for confirmation of delivery date
Regular price €26.02 Price €26.02

Case for Arduino Uno - black

Black case that protects the module Arduino Uno from the external environment. It provides access to all connectors and ensures ventilation of the integrated circuits.
Index: SBC-02282
Index: SBC-02282
Delivery scheduled for 2022-07-08
Regular price €3.88 Price €3.88

Connecting cables male-male - 65pcs.

A set of 65 connecting wires to the breadboards of different lengths and in different colors.
Index: KAB-01022
Index: KAB-01022
Waiting for confirmation of delivery date
Regular price €1.71 Price €1.71
  • EOL

Switch-mode power supply 12V/2,5A - 100V-240V - DC plug 5,5/2,5mm

Stabilized power supply. Supply voltage: 100 V to 240 V. Output voltage: 12 V DC. Output current: 2.5 A. Connector: DC plug 5,5 / 2,5 m (compatible with 5.5 / 2.1 mm).
Index: ZAS-07155
Index: ZAS-07155
In stock, shipping 24 hours!
Check quantity
Regular price €4.75 Price €4.75

Arduino Uno Rev3 - module A000066

The original module from the Arduino® Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
Check quantity
Regular price €21.48 Price €21.48

Bluetooth module HC-05

Module Bluetooth v2.0 + EDR, class 2. It works with a voltage of 3.3 V and communicates over a serial UART interface (RX, TX), supports the AT command. Maximum transmitter...
Index: MOD-02570
Index: MOD-02570
In stock, shipping 24 hours!
Check quantity
Regular price €14.97 Price €14.97

Breadboard - 170 holes green

Breadboard is used for creating and testing electronic circuits in color green.
Index: AKS-10287
Index: AKS-10287
Waiting for confirmation of delivery date
Regular price €0.85 Price €0.85

Redox Race DC Motor 7,2V 20000RPM

Brush motor providing a torque of 0.245 kg*cm (0.02 Nm) . The supply voltage is equal to 7.2 V and the speed is 20000 rpm.
Index: ANF-11573
Index: ANF-11573
Available, 24 hours shipping!
Check quantity
Regular price €8.44 Price €8.44

Products from the same category

Arduino Motor Shield Rev3

Module allows control of two DC motors (DC) using Arduino kits. The system allows you to adjust the direction and speed of rotation of DC motors with a current consumption up...
Index: ARD-01215
Index: ARD-01215
In stock, shipping 24 hours!
Check quantity
Regular price €24.93 Price €24.93

L293D Motor Driver Board - 2-channel motor driver 16V/0.6 A - Shield for Arduino - Iduino ST1138

The module allows you to control four DC motors (DC) or two stepper motors using Arduino kits. The system allows to adjust the direction and speed of rotation of the motors...
Index: MOD-08224
Index: MOD-08224
Delivery scheduled for 2022-07-14
Regular price €5.86 Price €5.86

Cytron SHIELD-2AMOTOR - 2-channel motor driver 26V/2A - shield for Arduino

Shield for Arduino with dual-channel DC motor driver operating with a voltage of 5 V to 26 V and current up to 2 A, based on the L298P circuit. The board has jumpers for...
Index: CTN-12404
Index: CTN-12404
In stock, shipping 24 hours!
Check quantity
Regular price €12.80 Price €12.80

Ramps 1.4 RepRap driver for 3D printer

Popular driver of 3D printer, adapted to work with Arduino Mega 2560 and stepper motors driver A4988. The system requires a power source with an output voltage of 12 V and...
Index: MOD-02193
Index: MOD-02193
In stock, shipping 24 hours!
Check quantity
Regular price €7.14 Price €7.14

TB6612 Motor Shield - 4x DC motor driver - 12V/1,2 A - Shield for Arduino

The module allows you to control four DC motors (DC), with two stepper motors or two servos using Arduino kits. The system allows you to adjust the direction and speed of...
Index: GRL-12811
Index: GRL-12811
In stock, shipping 24 hours!
Check quantity
Regular price €21.68 Price €21.68

DFRobot TB6612 - 4-channel motor driver 13.5V/1.2A - Shield for Arduino

The module allows you to control four DC motors (DC) using boards of the Arduino. The system allows you to adjust the direction and rotation speed of the motors with a current...
Index: DFR-07441
Index: DFR-07441
In stock, shipping 24 hours!
Check quantity
Regular price €16.04 Price €16.04

DRV8835 dual - 2-channel motor driver 11V/1,2 A - Shield for Arduino - Pololu 2511

Dual channel DRV8835 module operates with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). The chip can be connected directly to Arduino board.
Index: PLL-02671
Index: PLL-02671
Available, 24 hours shipping!
Check quantity
Regular price €18.64 Price €18.64

Robot Arm Braccio TinkerKit + Arduino Shield driver

Arm of the robot for self-assembly, equipped with 6 servos. There is also a special controller Braccio in the form of cap over the Arduino and the necessary mounting elements....
Index: ROB-06362
Index: ROB-06362
In stock, shipping 24 hours!
Check quantity
Regular price €237.62 Price €237.62

16-channel servo driver, 12-bit PWM I2C - Shield for Arduino - Adafruit 1411

16-channel PWM generator, it is useful when there is not enough outputs of the microcontroller. Allows for i.a.: control of the servos, speed adjustment of motors or change the...
Index: ADA-02448
Index: ADA-02448
In stock, shipping 24 hours!
Check quantity
Regular price €23.65 Price €23.65

DFRobot DRV8825 - 2-channel stepper motor driver 45V/2,5A - Shield for Arduino

Arduino overlay for controlling two stepper motors via the popular DRV8825. On the board there is a socket for connecting XBee wireless modules and clamp connectors for easy...
Index: DFR-02690
Index: DFR-02690
Delivery scheduled for 2022-06-30
Regular price €38.84 Price €38.84

Zumo Shield v1.2 - main board for Arduino - Pololu 2508

The controller is suitable for Arduino connectors allowing you to build a fighting robot - minisumo. It works with Uno, Leonardo boards and their derivatives.
Index: PLL-02936
Index: PLL-02936
In stock, shipping 24 hours!
Check quantity
Regular price €21.27 Price €15.95
  • Reduced price
  • Promotion

Zumo v1.2 - minisumo robot KIT for Arduino - Pololu 2509

Fighting education robot for self-assembly. The platform has the opportunity to plug in Arduino Uno or Leonardo modules. The kit includes: main board Zumo Shield, a chassis...
Index: PLL-02937
Index: PLL-02937
In stock, shipping 24 hours!
Check quantity
Regular price €64.45 Price €64.45