STM32F103C8T6
STM32F103C8T6
STM32F103C8T6 - zdjęcie 1
STM32F103C8T6 - zdjęcie 2

Microcontroler ST STM32F100C8T6B Cortex M3 - LQFP48

Index: UCC-01452

32-bit microcontroller ST in LQFP48 case with ARM core Cortex-M3 is equipped with: 64 kB Flash, 8 KB RAM, UART, I2C, SPI, ADC. Photos of this product are only examples, the systems may differ in the number of outputs depending on the case.

€4.40
€3.57 tax excl.

Unavailable
Discontinued product
30-day returns
Manufacturer: STMicroelectronics

Attention!

The product has been discontinued. Check others products in category.

Specification

  • Manufacturer markings: STM32F100C8T6B
  • Core: 32-bit ARM Cortex M3
  • Flash memory: 64 KB
  • Memory: 8 KB
  • The maximum core clock frequency: 24 MHz
  • The number of counters (timers) 16-bit: 7
  • Support PWM
  • Converter ADC:
    • Resolution: 12 bits
    • Number of channels: 10 channels
  • DAC:
    • Resolution: 12 bits
    • Number of channels: 2
  • Interfaces: 2 x SPI, 2 I2C, 3 USART
  • DMA controller
  • Supply voltage: 2 V to 3.6 V
  • Case: LQFP48

 

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
Terms of service
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Terms of service
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN
Terms of service

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Terms of service
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Terms of service
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
Terms of service
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.
Send us your question

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like
STM32F407G-DISC1 -...

STM32F407G-DISC1 - Discovery - STM32F4DISCOVERY

The commissioning kit is built on the basis of STM32F407VGT6 microcontroller, it allows you to get to know the systems equipped with the latest Cortex-M4F core from ARM...
Index: DIS-00445
Index: DIS-00445
Czas oczekiwania: ok. 10-30 dni
Regular price €24.16 Price €24.16
STM32VL - Discovery

STM32VL - Discovery

Developemnt set STM32VL - Discovery based on a microcontroller STM32F100RB allows you to get acquainted with the advantages of the Value Line series, developed by...
Index: DIS-00496
Index: DIS-00496
Na zamówienie: 7-20 dni
Regular price €12.53 Price €12.53

Customers who bought this product also bought:

3-axis digital accelerometer LIS35DE

3-axis accelerometer, digital LIS35DE

3-axis MEMS-type acceleration sensor in a small LGA14 housing. Measuring range adjustable: ±2 g or ±8 g . It communicates via the I2C or SPI bus.
Index: SES-00967
Index: SES-00967
Unavailable
Regular price €5.79 Price €5.79
Die-cutter B327 - 100 g

Etcher B327 - 100g

Printed circuit board etching agent. Dissolves very quickly and does not crystallise from the solution. It etch evenly, ensuring sharp contours and minimising irritation.
Index: CHE-01057
Index: CHE-01057
Available, 24h shipping!
(Check quantity)
Regular price €1.02 Price €1.02
Drill 0.7mm - 10pcs.

Drill 0,7mm - 10pcs

A set of 10 drills for metal and hole making in printed circuit boards.
Index: NSZ-00232
Index: NSZ-00232
Available, 24h shipping!
(Check quantity)
Regular price €2.21 Price €2.21
Gel rechargeable battery 6V 1.2 Ah ST

Gel battery 6V 1.2 Ah ST

Maintenance-free, leak-free, rechargeable gel battery. Nominal voltage is 6 V, capacity 1.2 Ah.
Index: AKU-01532
Index: AKU-01532
Unavailable
Regular price €3.47 Price €3.47
Gniazdo do karty pamięci SD z wyrzutnikiem SD238

SD card reader module

The module that facilitates the connection of the SD card to the main board (e.g. Arduino or STM32Discovery). It is powered with the voltage of 5 V or 3.3 V. The communication...
Index: MOD-01507
Index: MOD-01507
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.28 Price €1.28
3.3V LDO Stabiliser LF33CDT - SMD TO252

Linear voltage regulator LDO 3,3V LF33CDT - SMD TO252 - 5pcs.

The LDO Stabilizer LF33CV is used to power systems operating at 3.3 V. The maximum output current is 0.5 A.
Index: UCC-00471
Index: UCC-00471
Waiting time: about 10-30 days
Regular price €2.72 Price €2.72
Cables, measuring probes...

Cables, measuring probes for multimeters - universal

The cables are terminated on one side with angled banana plugs with shielded ends of 4 mm diameter, on the other side with 120 mm long measuring probes. Cable length is 85 cm...
Index: UPM-01070
Index: UPM-01070
Unavailable
Regular price €1.28 Price €1.28
Drill 0.8mm - 10pcs.

Drill 0,8mm - 10pcs

A set of 10 drills for metal and hole making in printed circuit boards.
Index: NSZ-00233
Index: NSZ-00233
Waiting time: about 10-30 days
Regular price €2.30 Price €2.30
Drill 1.0mm - 10pcs.

Drill 1,0mm - 10pcs

A set of 10 drills for metal and hole making in printed circuit boards.
Index: NSZ-00234
Index: NSZ-00234
Available, 24h shipping!
(Check quantity)
Regular price €1.14 Price €1.14
Laminate FR4 unilateral size L

Laminate FR4 single-sided size L

FR4 laminate on one side with a thickness of about 1.0 mm. Copper layer 35 um. The sheet dimensions are 130 x 200 mm, with a tolerance of 20 mm.
Index: LUT-00931
Index: LUT-00931
Waiting time: about 10-30 days
Regular price €1.37 Price €1.37
Wtyk goldpin 1x40 prosty

Goldpin plug 1x40 straight 2.54mm pitch

Goldpin male 1x40 strap, pitch is 2.54 mm.
Index: KAB-00192
Index: KAB-00192
Unavailable
Regular price €0.16 Price €0.16
Kondensator elektrolityczny 100uF/16V SMD

Electrolytic capacitor 100uF/16V SMD - 5pcs

Electrolytic capacitor SMD, capacitance: 100 uF, maximum voltage: 16 V, max. operating temperature: 85 °C. Price for 5 PCs.
Index: UCC-00257
Index: UCC-00257
Unavailable
Regular price €0.58 Price €0.58

Products from the same category

Tamiya Mabuchi FA-130 engine

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98
Micro-Match connector - 10 pin socket

Micro-Match connector - 10 pin socket

Micro-Match connector for 10-pin printing.
Index: UCC-00283
Index: UCC-00283
Unavailable
Regular price €0.21 Price €0.21
Connector Micro-Match to the ribbon 10 pin

Micro-Match connector for 10-pin tape

Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.
Index: UCC-00285
Index: UCC-00285
Unavailable
Regular price €0.91 Price €0.91
LPR550AL 2-axis XY gyroscope

Pololu LPY550AL 2-axis XZ gyroscope

A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
Unavailable
Regular price €15.12 Price €15.12
LSM303DLH 3D Akcelerometr + Kompas

3-axis magnetometer, digital MAG3110

3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.
Index: SES-00964
Index: SES-00964
Unavailable
Regular price €1.86 Price €1.86
Lego Mindstorms NXT 2.0

HiTechnic color sensor - for Lego Mindstorms EV3 and NXT

The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.
Index: ROB-00982
Index: ROB-00982
Unavailable
Regular price €55.58 Price €55.58
Lego Mindstorms NXT 2.0

Servomechanism - Lego Mindstorms NXT

The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.
Index: ROB-00986
Index: ROB-00986
Unavailable
Regular price €32.33 Price €32.33
Lego Mindstorms NXT 2.0

USB Bluetooth adapter - Lego Mindstorms NXT

Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.
Index: ROB-00987
Index: ROB-00987
Unavailable
Regular price €39.30 Price €39.30
Gift voucher - PLN 50

Gift voucher - PLN 50

Gift certificate worth PLN 50.
Index: BON-01044
Index: BON-01044
Unavailable
Regular price €11.63 Price €11.63
Gift Certificate - 300 PLN

Gift Card - 300zł

Gift certificate worth PLN 300.
Index: BON-01045
Index: BON-01045
Unavailable
Regular price €69.77 Price €69.77
Moduł GPS GPS-GMS-U1LP

Receiver module GPS-FGPMMOPA6H GPS

Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.
Index: UCC-01233
Index: UCC-01233
Unavailable
Regular price €23.23 Price €23.23
Bluetooth antenna ANT9520-245

Bluetooth antenna ANT9520-245

Internal Bluetooth antenna, ZigBee, WLAN in SMD housing. Works on the frequency: 2.45 GHz in 200 MHz, 1.5 dBi band. Dimensions of the housing are 9.5 x 2.0 x 1.0 mm .
Index: SES-01263
Index: SES-01263
Unavailable
Regular price €0.58 Price €0.58