- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: WiFi module ESP-M2 ESP8285
The module is based on the ESP8285 chip which is an enhanced version of the ESP8266 with integratedTCP/IP protocol andATcommandsupport.It operates inWiFi 802.11 b/g/nstandard on2.4 GHz. It is equipped with 16 outputs - 2 mm raster, 10 of which areGPIO, ADC, SPI, I2C and UARTpins. It has a built-in PCB antenna. PCB dimensions are 20 x 12 x 3 mm.
Main features of ESP-M2 ESP8285 WiFi module
- 32-bit TensilicaL106microprocessorin RISC architecture with very low power consumption, clocked at 80/160 MHz.
- The chip has a built-in 10-bit analogue-to-digital converter.
- Support for SmartConfig function for Android and iOS devices.
- Works in WiFi 802.11 b/g/n standard on 2.4 GHz.
- Support for AT commands andwireless firmware update (OTA).
- Standard IEEE802.11b/g/n/e/iprotocoland TCP/IP protocol stack.
WiFi Router specification ESP-M2 ESP8285
- Power supply voltage: 3,3 V
- Current consumption: 80 mA
- Operating temperature: -40 °C to 125 °C
- System: ESP8285
- Microcontroller: TensilicaL106 32-bit
- Encryption: WPA / WPA2 / WEP / TKIP / AES
- Network protocol: IPv4, TCP / UDP / HTTP / FTP / MQTT
- Wifi standard: 802.11 b/g/n
- Operating frequency: 2.4GHz
- The sensitivity of the receiver:
- 802.11b: -91 dbm / 11 Mb/s
- 802.11g: -75 dbm / 54 Mb/s
- 802.11n: -72 dbm / MCS7
- Transmitter power:
- 802.11b: +20 dBm
- 802.11g: +17 dBm
- 802.11n: +14 dBm
- Dimensions: 20 x12 x 3 mm
- Weight: 1 g
Useful links |
