- EOL
|
Attention! The sale of the product has been completed. Check others in thiscategory. |
Product description: Grove - WiFi module W600 ARM Cortex M3
2.4 GHz WiFimodule forArduinosupporting802.11 b/g/n standard. W600 is based onARM Cortex M3processor with1 MBflashmemory andfreeRTOSkernel. It communicates viaUART interface. The board is equipped withGrove connectorfor easy connection withGrove Base Shield.
W600is equipped withGroveinterface,two buttons(reset and configuration) andthree LEDs(power, reset, WiFi). There is alsoa PCB antennaon the board. The module supportsAT commands, just connect the module to Arduino and connect to WiFi using UART program. The module is also equipped with additional I/O pins, such as:I2S, I2C, SPI, GPIO.
Also included is a compatible Grove cable.
The module works withAndroid and iOSsystems,in the application you can connect and disconnect from the WiFI network with one button.
|
Product compatible withArduino The producer prepareda library for Arduino. |
Connection of the module
The module is equipped with Grove interface for easy connection withArduinoandBase Shield v2.0overlay.
| Pin | Description |
|---|---|
| GND | The weight of the system. |
| VCC | Supply voltage 5 V. |
| TX | The transmitting pin of the UART transmission. |
| RX | UART transmission receiving pin. |
Module specification W600
- Power supply voltage: 5 V
- Supported standard: IEEE 802.11 b/g/n
- Supported frequency: 2.4 GHz to 2.4835 GHz
- Supported WiFi encryption: WMM / WMM-PS / WPA / WPA / WPA2 / WPS
- Protocols supported: TCP / UDP / ICMP / DHCP / DNS / HTTP
- Built-in GPIO controller
- Supports AT commands + instructions based on ASCII
- UART communication
- Dimensions: 50 x 25 mm
Useful links |
