- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Device for washing and curing prints - Anycubic Wash & Cure Machine v2.0
Device designed for final processing of 3D prints, made of resin. It allows you to work in two modes: washing and drying the printout. Final curing of the printout is done by uniformly exposing the model to UV light with wavelength of 405 nm. Maximum size of a dried model is 140 x 165 mm. In case of the washing option the maximum size of the object is 120 x 74 x 165 mm. Dimensions of the construction are 225 x 235 x 365 mm.
Anycubic Wash & Cure Machine.
Two modes of operation.
2 in 1 device
Anycubic Wash & Cure Machine is a device that can be used both as a convenient washer for prints and a specialized tool for drying finished models. One device allows for comprehensive treatment of the finished 3D print.
Prints washing
Anycubic Wash & Cure Machine v2.0 offers the possibility of washing the printout in a specially designed container, by dipping the model into a suitable resin remover. The design of the container assumes the use of a tight lid, which prevents splashing of the cleaning agent.
3D prints washing function.
Therotating platform allows for an even hardening of the printout on its entire surface.
360° rotating platform
Therotating platform on which the model is placed allows for an even hardening of the print in any place, even those hard to reach. The uniform rotation provides exposure to UV light of each element of the print. By adding a reflector you can also cure the upper part of the model.
Convenient and safe to use
The device is controlled by a button and a knob located on the front of the housing. The button selects the operating mode, while the knob allows you to set the operating time from 1 to 60 minutes. The cover in Anycubic Wash & Cure Machine v2.0 stops 99.95% of UV light from escaping.
Easy to operate and safe to use.
Specifications of Anycubic Wash & Cure Machine
| Technical Specification | |
|---|---|
| Voltage: | 110V to 220V AC |
| Power: | 25 W |
| Wavelength of UV light: | 405 nm |
| Print cleaning and drying time: | 1 to 60 minutes |
| Maximum model dimensions (washing): | 120 x 74 x 165 mm |
| Maximum model dimensions (drying): | 140 x 165 mm |
| Unit dimensions: | 225 x 235 x 365 mm |
| Weight: | 3.7 kg |
Device for washing and drying prints - Anycubic Wash & Cure Machine
This product is a multifunctional device, which is designed for final processing of 3D models made of resin. The basic capabilities of the equipment are washing and drying the object and curing it with UV light.
The product allows you to dry models no larger than 140 mm x 165 mm, and wash objects no larger than 120 mm x 74 mm x 165 mm. Thanks to its clever design, the equipment takes up relatively little space (225 mm x 235 mm x 265 mm).
Accessory for resin models printed on a 3D printer
The device is able to wash the model in a special container, into which you should pour a special resin remover. The equipment is also able to evenly and accurately cure the resin, thanks to the UV lighting system (wavelength of 405 nm) and a special platform on which the model rotates at a uniform speed.
It is worth noting that the offered resin 3D printer accessory comes with a matching transparent case, thanks to which you can observe the process from the outside. However, you should not be afraid of harmful effects related to strong UV rays - the casing is made of a material that passes only 0.05 ultraviolet light.
Useful links |
